NIPCI-5114 NI [National Instruments Corporation], NIPCI-5114 Datasheet - Page 3

• Manufacturer Part Number: NIPCI-5114
• Description: 250 MS/s, 125 MHz, 8-Bit Digitizers
• Manufacturer: NI [National Instruments Corporation]

250 MS/s, 125 MHz, 8-Bit Digitizers
External Trigger Channel (TRIG)
Impedance........................................... 1 MΩ || 22 pF
Vertical range...................................... ±5 V
Coupling .............................................. AC, DC
Intermodule SMC Synchronization Using
NI-TClk (typical)
Skew.................................................... 500 ps
Power Requirements (typical)
Environment
Operating temperature
Storage temperature........................... -40 to 71 °C (meets
Relative humidity ................................ 10 to 90%, noncondensing
2
Calibration
Self-calibration.................................... Gain, offset, compensated
External calibration interval................ 2 years
0 to 45 °C in PXI-101x or PXI-1000/B chassis.
PXI
PCI
+3.3 VDC
840 mA
1.6 A
2
...................... 0 to 55 °C for PXI-5114,
+5 VDC
1.1 A
1.7 A
+12 VDC
250 mA
45 mA
≤20 ps after manual adjustment
0 to 45 °C for PCI-5114
(meets IEC-60068-2-1 and
IEC-60068-2-2)
IEC-60068-2-1 and IEC-60068-2-2)
(meets IEC-60068-2-56)
1 MΩ attenuator, triggering,
and timing for all input ranges
-12 VDC
170 mA
0 A
Total Power
13.32 W
14.32 W
Safety and Compliance
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to
product documentation.
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3