PIC17C752-08/CL MICROCHIP [Microchip Technology], PIC17C752-08/CL Datasheet - Page 167

• Manufacturer Part Number: PIC17C752-08/CL
• Description: High-Performance 8-Bit CMOS EPROM Microcontrollers with 10-bit A/D
• Manufacturer: MICROCHIP [Microchip Technology]

15.2.15 CLOCK ARBITRATION
Clock arbitration occurs when the master during any
receive, transmit, or repeated start/stop condition
de-asserts the SCL pin (SCL allowed to float high).
When the SCL pin is allowed to float high, the baud
rate generator (BRG) is suspended from counting until
the SCL pin is actually sampled high. When the SCL
pin is sampled high, the baud rate generator is
reloaded with the contents of SSPADD<6:0> and
begins counting. This ensures that the SCL high time
will always be at least one BRG rollover count in the
event that the clock is held low by an external device.
(Figure
FIGURE 15-36: CLOCK ARBITRATION TIMING IN MASTER TRANSMIT MODE
BRG overflow,
Release SCL,
If SCL = 1 Load BRG with
SSPADD<6:0>, and start count
to measure high time interval
1998 Microchip Technology Inc.
15-36)
SCL
SDA
T
BRG
BRG overflow occurs,
Release SCL, Slave device holds SCL low.
T
BRG
SCL line sampled once every machine cycle (T
Hold off BRG until SCL is sampled high.
15.2.16 SLEEP OPERATION
While in sleep mode, the I
addresses or data, and when an address match or
complete byte transfer occurs wake the processor from
sleep ( if the SSP interrupt is enabled).
15.2.17 EFFECTS OF A RESET
A reset disables the SSP module and terminates the
current transfer.
T
SCL = 1 BRG starts counting
clock high interval.
BRG
PIC17C7XX
2
C module can receive
osc
DS30289A-page 167
4).