AIC1723 AIC [Analog Intergrations Corporation], AIC1723 Datasheet - Page 6

• Manufacturer Part Number: AIC1723
• Description: 500mA Low Dropout Linear Regulator
• Manufacturer: AIC [Analog Intergrations Corporation]

APPLICATION INFORMATIONS
A 4.7 µ F (or greater) capacitor is required between
the AIC1723 output and ground for stability.
Without this capacitor the part will oscillate. Even
though most types of capacitor may work, the
equivalent series resistance (ESR) should be held
to 5 Ω or less if Aluminum electrolytic type is used.
Many Aluminum electrolytics have electrolytes that
freeze at about -30 ° C, so solid tantalums are
recommended for operation below -25 ° C. The
value of this capacitor may be increased without
limit.
PIN DESCRIPTION
VOUT PIN - Output pin.
GND PIN - Power GND.
VIN PIN
- Power Supply Input.
A 0.1 µ F capacitor (or greater) should be placed
from the AIC1723 input to ground if the lead
inductance between the input and power source
exceeds 500nH (approximately 10 inches of
trace).
AIC1723
6