AT83C5122_08 ATMEL [ATMEL Corporation], AT83C5122_08 Datasheet - Page 41

• Manufacturer Part Number: AT83C5122_08
• Description: C51 Microcontroller with USB and Smart Card Reader Interfaces
• Manufacturer: ATMEL [ATMEL Corporation]

Clock Tree Architecture
4202F–SCR–07/2008
Figure 18. PLL Programming Flow
The clock controller outputs several different clocks as shown in Figure 19:
•
•
•
•
•
These clocks are enabled or not depending on the power reduction mode as detailed in
Section “Power Management”, page 178.
These clocks are generated using four presacalers defined in the table below:
Prescaler
PR1
PR2
PR3
PR4
a clock for the CPU core
a clock for the peripherals which is used to generate the timers, watchdog, SPI,
UART, and ports sampling clocks. This divided clock will be used to generate the
alternate card clock.
a clock for the USB
a clock for the SCIB controller
a clock for the DC/DC converter
Configure Dividers
Programming
PLL Locked?
N3:0=
R3:0=
Enable PLL
PLOCK= 1?
PLLEN= 1
PLL
Register
CKRL
SCICLK
SCSR
DCCKPS
xxxxb
xxxxb
Reload Factor
CKRL[0:3]
SCICLK[0:5]
ALTKPS[0:1]
DCCKPS[3:0]
AT83R5122, AT8xC5122/23
Smart card
Function
CPU & Peripheral clocks
Alternate card
DC/DC
41