PTN3332D PHILIPS [NXP Semiconductors], PTN3332D Datasheet - Page 14

• Manufacturer Part Number: PTN3332D
• Description: High speed differential line receiver
• Manufacturer: PHILIPS [NXP Semiconductors]

Philips Semiconductors
15. Revision history
Table 10:
9397 750 08341
Product data
Rev Date
01
20040107
Revision history
CPCN
-
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Description
Product data (9397 750 08341). ECN 853-2443 A14996 dated 15 December 2003.
These transparent plastic packages are extremely sensitive to reflow soldering conditions and must
on no account be processed through more than one soldering cycle or subjected to infrared reflow
soldering with peak temperature exceeding 217 C
oven. The package body peak temperature must be kept as low as possible.
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom
side, the solder cannot penetrate between the printed-circuit board and the heatsink. On versions with
the heatsink on the top side, the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave
direction. The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it
is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered
pre-mounted on flex foil. However, the image sensor package can be mounted by the client on a flex
foil by using a hot bar soldering process. The appropriate soldering profile can be provided on
request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
Rev. 01 — 07 January 2004
10 C measured in the atmosphere of the reflow
High speed differential line receiver
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
PTN3332
14 of 16