TP11MS9AVKE22 ITT [ITT Industries], TP11MS9AVKE22 Datasheet - Page 2

• Manufacturer Part Number: TP11MS9AVKE22
• Description: Tiny Pushbutton Switches
• Manufacturer: ITT [ITT Industries]

Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
ELECTRICAL LIFE: TP11, TP21 MODELS: 60,000 make-and-break
CONTACT RESISTANCE: Below 20 milliohms typ. initial @
INSULATION RESISTANCE: 10
DIELECTRIC STRENGTH: 1000 V RMS min. @ sea level.
OPERATING TEMPERATURE: –30 C to 85 C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
MOM. = Momentary
NOTE: For PC termination, replace ‘Z’ with ‘C’.
For panel & PC mounting information, see page B-13.
MOM. = Momentary
NOTE: For PC mounting information, see page B-14.
MOM. = Momentary
NOTE: For PC mounting information, see page B-14.
TP12SHZQE
TP21SHZQE
TP12SH8ABE
TP11SHZQE
TP11SH8ABE
TP11SH9ABE
TP12SH9ABE
PART NUMBER
PART NUMBER
PART NUMBER
20 V AC or DC max. Q contact material: 1 AMP @
120 V AC or 28 V DC. See page B-16 for additional ratings.
cycles at full load.
TP12 MODELS: 30,000 cycles.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
EIA RS-186E method 9 (1 hour steam aging).
Europe Sales Tel: [phone] Fax: [phone]
C&K Components, Inc. Web Site: www.ckcorp.com Americas Sales Tel: [phone] Fax: [phone]
FUNCTION
FUNCTION
FUNCTION
SPST
SPDT
DPST
SPST
SPDT
SPST
SPDT
POS. 1
OFF
OFF
ON
POS. 1
POS. 1
OFF
OFF
ON
9
ON
Ñ Ñ Ñ
ohms min.
POS. 2
Ñ Ñ
Ñ Ñ
Ñ Ñ
Ñ Ñ
MOM.
MOM.
MOM.
POS. 2
POS. 2
MOM.
MOM.
MOM.
MOM.
SWITCHES WITH STANDARD OPTIONS
Rev. A 8/99
Materials
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
PLUNGER: Thermoplastic polyester (UL 94V-0).
CAP & FRAME: Nylon, black standard.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass nickel plated.
Asia Sales Tel: [phone] Fax: [phone]
diallyl phthalate (DAP), (UL 94V-0).
nickel plate. Q contact material: Coin silver, silver plated. See page
B-16 for additional contact materials.
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page B-16 for additional contact materials.
Lockwasher: Steel, nickel plated.
Tiny Pushbutton Switches
SP Models
Omit center terminals for
SPST & DPST models.
Omit center terminal for
Omit center terminal for
SPST models.
SPST models.
DP Models
TP Series
TP12SH8ABE
TP12SH9ABE
TP12SHZQE
SPDT
SPDT
SPDT
B-11
B