ADL5605-EVALZ AD [Analog Devices], ADL5605-EVALZ Datasheet - Page 7

• Manufacturer Part Number: ADL5605-EVALZ
• Description: 700 MHz to 1000 MHz
• Manufacturer: AD [Analog Devices]

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Table 5. Pin Function Descriptions
Pin No.
1
2
3
4
5, 6, 7, 8, 13,
14, 15, 16
9, 10, 11, 12
Mnemonic
RFIN
DISABLE
VCC
VBIAS
NC
RFOUT
EP
Description
RF Input. Requires a dc blocking capacitor.
Connect this pin to 5 V to disable the part. In the disabled state, the part draws approximately 5 mA
of current from the power supply and 1.4 mA from the DISABLE pin.
Under normal operation, this pin is connected to the power supply and draws a combined 307 mA
of current. When this pin is grounded along with the VBIAS pin, the device is disabled and draws
approximately 1.4 mA from the DISABLE pin.
Applying 5 V to this pin enables the bias circuit. When this pin is grounded, the device is disabled.
No Connect. Do not connect to this pin.
RF Output. DC bias is provided to this pin through an inductor that is connected to the 5 V power
supply. The RF path requires a dc blocking capacitor.
The exposed paddle should be soldered to a low impedance electrical and thermal ground plane.
DISABLE
NOTES
1. THE EXPOSED PADDLE SHOULD BE SOLDERED
2. NC = NO CONNECT. DO NOT CONNECT TO THIS PIN.
VBIAS
TO A LOW IMPEDANCE ELECTRICAL AND
THERMAL GROUND PLANE.
RFIN
VCC
1
2
3
4
Figure 3. Pin Configuration
(Not to Scale)
ADL5605
TOP VIEW
Rev. 0 | Page 7 of 20
PIN 1
INDICATOR
12 RFOUT
11 RFOUT
10 RFOUT
9 RFOUT
ADL5605