PNX8510HW/B1 PHILIPS [NXP Semiconductors], PNX8510HW/B1 Datasheet - Page 9

• Manufacturer Part Number: PNX8510HW/B1
• Description: Analog companion chip
• Manufacturer: PHILIPS [NXP Semiconductors]

Philips Semiconductors
9397 750 12612
Product data
Table 7:
Table 8:
Table 9:
[1]
The PNX8510/11 supports color space conversion only in the primary RGB standard
definition data path. For the high definition part of the primary video data path and for
the secondary video data path no color space conversion is available. Hence the
video data has to be provided in the display destination color space.
Aside from built-in video encoders, which generate all necessary timing and filtering
for an appropriate sync raster for PAL, NTSC and SECAM, the PNX8510/11 contains
a separate raster-generation engine which also supports but is not limited to the
HD-formats, such as the SMPTE 274M. The PNX8510/11 also contains an
up-sampling filter to convert 4:2:2 formats (other than standard definition formats) to
4:4:4.
In the case of combined double D1 mode, no secondary display channel is available.
Display/interface mode
Single Interface Mode 2 (D1)
Accommodates 2 synchronous multiplexed D1 streams
for low cost applications (both streams are extracted).
Display/interface mode
Interleaved interface mode
Same formats as in single interface mode 1 and 2 but
only one of the two interleaved video streams is
extracted per interface.
Selection of the extracted slice is possible by software,
Usage of two PNX8510/11 chips possible to support up
to 4 display/record devices
Display/interface mode
Combined double D1 mode:
combined to carry a single HDTV stream in 4:2:2 YUV or
4:2:2 YPrPb format
primary D1: Y channel
secondary D1: muxed UV or PrPb channel
i.e.: 1920x1080 60 Hz interlaced
2200 pixel/line x 562.5 lines/field x 60 Hz = 74.25 MHz/Y
samples
37.125 MHz/Cr/Pr samples
37.125 MHz/Cb/Pb samples
In case of the combined double D1 mode, no secondary display channel is available
Single interface mode 2 (D1)
Interleaved interface mode
Combined double D1 mode
Rev. 04 – 12 January 2004
[1]
the two D1 interfaces are
Mode
2 combined D1
8/10-bit
Mode
2x muxed 4:2:2
single D1
8/10-bit
Mode
2x muxed 4:2:2
single D1 or 2x
muxed 4:4:4
RGB/YUV 8/10-bit
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
PNX8510/11
Analog companion chip
Interface
speed
54 MHz
Interface
speed
54 MHz or
81 MHz or
pos-neg
edge 27 MHz
(SAA7128
compliant)
Interface
speed
up to 81 MHz
per D1
9 of 92