24C01CT-E/P MICROCHIP [Microchip Technology], 24C01CT-E/P Datasheet - Page 8
![no-image](/images/no-image-200.jpg)
24C01CT-E/P
Manufacturer Part Number
24C01CT-E/P
Description
Manufacturer
MICROCHIP [Microchip Technology]
Datasheet
1.24C01CT-EP.pdf
(24 pages)
24C01C
7.0
Since the device will not acknowledge during a write
cycle, this can be used to determine when the cycle is
complete (this feature can be used to maximize bus
throughput). Once the Stop condition for a Write
command has been issued from the master, the device
initiates the internally timed write cycle. ACK polling
can be initiated immediately. This involves the master
sending a Start condition followed by the control byte
for a Write command (R/W = 0). If the device is still
busy with the write cycle, then no ACK will be returned.
If no ACK is returned, then the Start bit and control byte
must be re-sent. If the cycle is complete, then the
device will return the ACK and the master can then
proceed with the next Read or Write command. See
Figure 7-1 for flow diagram.
DS21201G-page 8
ACKNOWLEDGE POLLING
FIGURE 7-1:
Initiate Write Cycle
Send Control Byte
Write Command
with R/W = 0
Acknowledge
Condition to
Send Stop
(ACK = 0)?
Did Device
Send Start
Operation
ACKNOWLEDGE
POLLING FLOW
Send
© 2007 Microchip Technology Inc.
Next
Yes
No