ACC-AAM25 GAMEWELL-FCI [Gamewell-FCI by Honeywell], ACC-AAM25 Datasheet - Page 2

• Manufacturer Part Number: ACC-AAM25
• Description: Zoned Audio Command Center Voice Evacuation Control Panel
• Manufacturer: GAMEWELL-FCI [Gamewell-FCI by Honeywell]

2. System Trouble (yellow).
3. Message Generator Trouble (yellow).
4. Tone Generator Trouble (yellow).
5. Microphone Trouble (yellow).
6. Record/Playback (green).
7. All-Call (green = Active).
8. Audio ON/OFF (green = Active, yellow = Manual Deactivation).
9. Status of each speaker zone (green = Active, yellow = Manual Deactiva-
Other System LEDs: Battery Trouble, Charger Trouble, Ground Fault,
Speaker Circuit Trouble, and Amplifier Supervisory.
Ordering Information
Page 2 of 4
ACC-AAM25
ACC-EPM
FC-XRM70
FC-RM
FC-LPS
BAT-1270
BAT-12120
BAT-12180
GWACCZ
tion or Fault).
25 watt, 25 V
Panel (VECP) with integral commercial microphone, digital
message generator, zone-splitter module (ACC-ZSM), zone
page module with keypad (ACC-ZPMK).
Optional 25 watt, 25 V
Class A or Class B speaker circuit.
Optional External Page Module.
Optional 70.7 V
amplifier, consult factory for availability).
Optional Remote Microphone, includes backbox (only one
FC-RM per system).
Optional Local Playback Speaker.
Battery, 12 volt, 7.0 AH (two required).
Battery, 12 volt, 12.0 AH (two required).
Battery, 12 volt, 18.0 AH (two required).
RMS
RMS
, emergency Voice Evacuation Control
Converter Module (one required per
RMS
Audio Amplifier Module with single
GWACCZ CS-2505 09/01/06
Module Features
ACC-AAM25
• 25 watt, 25 V
• Field-programmable for system expansion to 50
• Provides single Class A or Class B speaker
• Utilizes plug-in-style terminal blocks for ease of
• Fully supervised and power-limited.
• Diagnostic LEDs include: yellow “trouble” LED
ACC-EPM
• Provides interface to non-fire paging equipment
• Provides plug-in-style terminal blocks for ease
• Transformer-isolated, 600-ohm audio
FC-XRM70
• Converts 25 V
• Plugs directly on ACC-AAM25 module(s),
FC-LPS
• Provides local digital message playback for user
Specifications
Electrical specifications
Command input circuits(CMD1andCMD2):
Trigger input voltage 10.5 — 29 VDC. NOTE:
When programmed for reverse-polarity
activation.
Trouble contact rating: 2.0 A at 30 VDC
(resistive), 0.6 A @ 125 VAC (resistive).
Auxiliary power output: Specific application
power 24 V, 35 mA.
Primary (AC) power: 1.6 A maximum
@ 120 VAC, 50/60 Hz.
Secondary power (battery) charging circuit:
• Supports lead-acid batteries only.
• Float-charge voltage: 27.6 V.
• Maximum charge current: 800 mA.
• Maximum battery charging capacity:18 AH.
Cabinet dimensions
• UL Listed: file S521.
watts (providing dual 25-watt speaker circuits)
or as a backup to the primary 25-watt amplifier
where required.
circuit.
service and maintenance.
(cable fault, 70 V
“amp functional” LED.
for non-emergency paging applications.
of service and maintenance.
connection to paging equipment.
for retrofit applications.
allowing independent conversion to 70.7V
review of field-recorded custom messages.
Door: 26.174" (66.482 cm) high x 15.780" (40.081
cm) wide x 1.125" (2.858 cm) deep. Backbox:
26.0" (66.040 cm) high x 15.5" (39.370 cm) wide x
4.75" (12.065 cm) deep, depth includes door.
Standards and Codes
The GWACC complies with the following
standards: NFPA 72 National Fire Alarm Code;
NFPA 101 Life Safety Code; UL 864 Standard
for Control Units for Fire Alarm Systems; and
UL 1711 Standard for Amplifiers for Fire Alarm
Systems.
Listings
Listings and approvals below apply to the basic
GWACCZ voice evacuation control panel. In
some cases, certain modules may not be listed
by certain approval agencies, or listing may be
in process. Consult factory for latest listing
status.
RMS
RMS
RMS
audio amplifier module.
audio outputs to 70.7 V
fault, amp fault) and green
RMS
RMS
.