XC612D1515ML TOREX [Torex Semiconductor], XC612D1515ML Datasheet - Page 7

• Manufacturer Part Number: XC612D1515ML
• Description: 2-Channel Voltage Detectors
• Manufacturer: TOREX [Torex Semiconductor]

■NOTES ON USE
●N.B.
1. Please use this IC within the specified maximum absolute ratings.
2. Please ensure that input voltage V
3. With a resistor connected between the V
4. With a resistor connected between the V
5. In order to stabilize the IC's operations, please ensure that the V
6. Should the power supply voltage V
7. For CMOS output products, high level output voltage which is generated when the transient response is released
1. Voltage detector 2's input voltage (V
2. Oscillation as a result of through current
Diagram 1. Voltage detector 2's input voltage V
the time of release. (refer to N.B. 2 below)
supply current flowing through the V
than 5 msec/V.
(V
becomes input voltage of V
An input protect diode is connected from input detector 2's input (V
voltage applied to V
Since the XC612 series are CMOS ICs, through current will flow when the IC's internal circuit switching operates
(during release and detect operations). Consequently, oscillation is liable to occur as a result of drops in voltage at the
through current's resistor (R
Since hysteresis exists during detect operations, oscillation is unlikely to occur.
DR2
) will shift somewhat.
IN2
exceed V
IN
IN
.
) during release voltage operations. (refer to diagram 2)
IN1
IN2
, current will flow through V
IN1
IN2
IN1
is less than V
)
pin.
exceed 6V, voltage detector 2's detect voltage (V
IN1
IN1
pin and the input, oscillation is liable to occur as a result of through current at
pin and the input, detect and release voltage will rise as a result of the IC's
IN2
IN1
+ 0.3V. (refer to N.B. 1 below)
Diagram 2. Through current oscillation
IN1
IN1
via the diode. (refer to diagram1)
IN2
pin's input frequency's rise and fall times are more
) to input detector 1's input. Therefore, should the
DF2
) and the release voltage
XC612
Series
7/14