UPG2314T5N_0607 CEL [California Eastern Labs], UPG2314T5N_0607 Datasheet - Page 9
![no-image](/images/no-image-200.jpg)
UPG2314T5N_0607
Manufacturer Part Number
UPG2314T5N_0607
Description
POWER AMPLIFIER FOR BluetoothTM Class 1
Manufacturer
CEL [California Eastern Labs]
Datasheet
1.UPG2314T5N_0607.pdf
(10 pages)
RECOMMENDED SOLDERING CONDITIONS
methods and conditions other than those recommended below, contact your nearby sales office.
Infrared Reflow
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
This product should be soldered and mounted under the following recommended conditions.
Soldering Method
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PG10624EJ01V0DS
Soldering Conditions
: 260°C or below
: 120±30 seconds
: 260°C or below
: 1 time
: 350°C or below
: 3 seconds or less
: 10 seconds or less
: 60 seconds or less
: 3 times
: 0.2%(Wt.) or below
: 10 seconds or less
: 0.2%(Wt.) or below
: 0.2%(Wt.) or below
Condition Symbol
µ
PG2314T5N
WS260
HS350
For soldering
IR260
9