D38999/49 Defense Supply Center, D38999/49 Datasheet - Page 63

• Manufacturer Part Number: D38999/49
• Description: D38999K / D38999J 500 Cycle Contact
• Manufacturer: Defense Supply Center

Notes:
10. Thread approach modified to eliminate cross-threading.
11. Receptacle coupling threads may have modified minor diameters.
12. Flycuts is a optional design for composite.
13. The "E" dimension does not apply.
14. Witness marks as result of threading are permissible on "F" diameter.
1. Dimensions are in millimeters (except coupling threads).
2. Inch equivalents are given for general information only.
3. A point at which a gauge pin, having the same basic diameter as the mating contact
4. Details "A" and "B" apply to both plugs and receptacles.
5. "A" initial contact with static seal.
6. Insert front surface shall be flat within .13 TIR.
7. Diameters H and G shall be concentric within .13 TIR at MMC.
8. Diameter W with respect to diameter V shall be concentric at MMC.
9. K dimension is for clearance of mounting screw heads.
and a square face, touches socket contact spring.
FIGURE 3. Connector intermateability dimensions (series III) - Continued.
MIL-DTL-38999K
63