MC10H130L ON Semiconductor, MC10H130L Datasheet - Page 3

• Manufacturer Part Number: MC10H130L
• Description: IC LATCH DUAL MECL 10H 16-CDIP
• Manufacturer: ON Semiconductor
• Series: 10Hr

Specifications of MC10H130L

• Logic Type: S-R Latch
• Circuit: 1:1
• Output Type: Differential
• Voltage - Supply: 5.2V
• Independent Circuits: 2
• Delay Time - Propagation: 1ns
• Operating Temperature: 0°C ~ 75°C
• Mounting Type: Through Hole
• Package / Case: 16-CDIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Current - Output High, Low: -

may be clocked separately by holding the common
clock in the low state, and using the clock enable inputs for
the clocking function. If the common clock is to be used to
clock the latch, the clock enable (CE) inputs must be in the
low state. In this mode, the enable inputs perform the
function of controlling the common clock (C).
while the clock is low. The outputs are latched on the
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
ORDERING INFORMATION
Specifications Brochure, BRD8011/D.
MC10H130FN
MC10H130FNG
MC10H130FNR2
MC10H130FNR2G
MC10H130L
MC10H130P
MC10H130PG
The MC10H130 is a clocked dual D type latch. Each latch
Any change at the D input will be reflected at the output
Device
APPLICATION INFORMATION
http://onsemi.com
(Pb−Free)
(Pb−Free)
(Pb−Free)
PLLC−20
PLLC−20
PLLC−20
PLLC−20
Package
CDIP−16
PDIP−16
PDIP−16
3
positive transition of the clock. While the clock is in the high
state, a change in the information present at the data inputs
will not affect the output information.
inputs. They are effective only when either C or CE or both
are high.
The set and reset inputs do not override the clock and D
500 / Tape & Reel
500 / Tape & Reel
46 Units / Rail
46 Units / Rail
25 Unit / Rail
25 Unit / Rail
25 Unit / Rail
Shipping
†