GS8182D18BGD-200I GSI Technology, GS8182D18BGD-200I Datasheet
![no-image](/images/manufacturer_photos/0/2/286/gsi_technology_sml.jpg)
GS8182D18BGD-200I
Manufacturer Part Number
GS8182D18BGD-200I
Description
BGA 165
Manufacturer
GSI Technology
Datasheet
1.GS8182D18BGD-200I.pdf
(37 pages)
Specifications of GS8182D18BGD-200I
Pack_quantity
144
Comm_code
85423245
Lead_time
70
165-Bump BGA
Commercial Temp
Industrial Temp
Features
• Simultaneous Read and Write SigmaQuad™ Interface
• JEDEC-standard pinout and package
• Dual Double Data Rate interface
• Byte Write controls sampled at data-in time
• Burst of 4 Read and Write
• 1.8 V +100/–100 mV core power supply
• 1.5 V or 1.8 V HSTL Interface
• Pipelined read operation
• Fully coherent read and write pipelines
• ZQ pin for programmable output drive strength
• IEEE 1149.1 JTAG-compliant Boundary Scan
• Pin-compatible with present 9Mb and future 36Mb and
• 165-bump, 13 mm x 15 mm, 1 mm bump pitch BGA package
• RoHS-compliant 165-bump BGA package available
SigmaQuad™ Family Overview
The GS8182D08/09/18/36BD are built in compliance with
the SigmaQuad-II SRAM pinout standard for Separate I/O
synchronous SRAMs. They are 18,874,368-bit (18Mb)
SRAMs. The GS8182D08/09/18/36BD SigmaQuad SRAMs
are just one element in a family of low power, low voltage
HSTL I/O SRAMs designed to operate at the speeds needed to
implement economical high performance networking systems.
Clocking and Addressing Schemes
The GS8182D08/09/18/36BD SigmaQuad-II SRAMs are
synchronous devices. They employ two input register clock
inputs, K and K. K and K are independent single-ended clock
inputs, not differential inputs to a single differential clock input
buffer. The device also allows the user to manipulate the
output register clock inputs quasi independently with the C and
Rev: 1.03 1/2009
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.
144Mb devices
tKHKH
tKHQV
0.45 ns
2.5 ns
-400
2.67 ns
0.45 ns
-375
Parameter Synopsis
1/37
0.45 ns
3.0 ns
18Mb SigmaQuad-II
-333
GS8182D08/09/18/36BD-400/375/333/300/250/200/167
Burst of 4 SRAM
0.45 ns
C clock inputs. C and C are also independent single-ended
clock inputs, not differential inputs. If the C clocks are tied
high, the K clocks are routed internally to fire the output
registers instead.
Because Separate I/O SigmaQuad-II B4 RAMs always transfer
data in four packets, A0 and A1 are internally set to 0 for the
first read or write transfer, and automatically incremented by 1
for the next transfers. Because the LSBs are tied off internally,
the address field of a SigmaQuad-II B4 RAM is always two
address pins less than the advertised index depth (e.g., the 1M
x 18 has a 256K addressable index).
3.3 ns
-300
0.45 ns
1 mm Bump Pitch, 11 x 15 Bump Array
4.0 ns
-250
165-Bump, 13 mm x 15 mm BGA
0.45 ns
5.0 ns
-200
Bottom View
0.50 ns
6.0 ns
-167
© 2007, GSI Technology
1.8 V and 1.5 V I/O
400 MHz–167 MHz
1.8 V V
DD