1N6131A Microsemi Corporation, 1N6131A Datasheet

1N6131A

Manufacturer Part Number

1N6131A

Description

E/Voidless-Hermetically-Sealed Bidirectional Transient Supressors

Manufacturer

Microsemi Corporation

Datasheets

1.JANTX1N6134A.pdf (4 pages)

2.1N6131A.pdf (2 pages)

Specifications of 1N6131A

Pack_quantity

Comm_code

85411000

Lead_time

168

Current page: 1 of 4
Download datasheet (193Kb)

10-3-2007 REV D

IMPORTANT: For the most current data, consult MICROSEMI’s website:

This series of industry recognized voidless-hermetically-sealed Bidirectional Transient

Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-19500/516 and are

ideal for high-reliability applications where a failure cannot be tolerated. They provide

a Working Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package

sizes for 500 W and 1500 W ratings. They are very robust in hard-glass construction

and also use an internal metallurgical bond identified as Category I for high reliability

applications. Both of these are also military qualified to MIL-PRF-19500/516. These

devices are available as both a non-suffix part and an “A” suffix part involving different

voltage tolerances as further described in note 4 on page 2. These devices are also

available in a surface mount MELF package configuration by adding a “US” suffix (see

separate data sheet for 1N6102US thru 1N6173AUS).

numerous other TVS products to meet higher and lower peak pulse power and voltage

ratings in both through-hole and surface-mount packages.

•

• Operating & Storage Temperature: -55

• Peak Pulse Power at 25

•

• Steady-State Power: 3.0 W for 1N6102 to 1N6137A and

•

• Thermal Resistance @ 3/8 inch lead length:

• Solder Temperatures: 260

NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from

mounting point to ambient is sufficiently controlled where T

High surge current and peak pulse power provides

transient voltage protection for sensitive circuits

Triple-layer passivation

Internal “Category I” metallurgical bonds

Voidless hermetically sealed glass package

JAN/TX/TXV military qualifications available per MIL-

PRF-19500/516 by adding JAN, JANTX, or JANTXV

prefix (consult factory for 1N6102 and 1N6138)

JANS available for 1N6103A thru 1N6118A per MIL-

PRF-19500/516 as well as further options for screening

in accordance with MIL-PRF-19500 for JANS on all

others in this series by using a “SP” prefix, e.g.

SP6119A, SP6143A, etc.

Surface Mount equivalents are also available in a

square-end-cap MELF configuration with a “US” suffix

(see separate data sheet)

1N6137A and 1500 Watts for 1N6138 to 1N6173A @

10/1000 µs (also see Figures 1,2 and 3)

Impulse repetition rate (duty factor): 0.01%

5.0 W for 1N6138 to 1N6173A @ T

lead length from body (see Figure 4)

3.0 W for 1N6138 to 1N6173A @ T

below and Figure 5)

33.5

1N6138 thru 1N6173A

Steady-State Power: 2.0 W for 1N6102 to 1N6137A and

C/W for 1N6102 to 1N6137A and 20.0

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

MAXIMUM RATINGS

S C O T T S D A L E D I V I S I O N

FEATURES

C: 500 Watts for 1N6102 to

C for 10 s (maximum)

DESCRIPTION

=25

= 75

C to +175

C (see note

C @3/8 inch

Scottsdale Division

C/W for

Microsemi

Voidless-Hermetically-Sealed Bidirectional

Microsemi also offers

or T

http://www.microsemi.com

J(MAX)

and 1N6138 thru 1N6173A

•

• CASE: Hermetically sealed voidless hard glass

• TERMINATIONS: Axial-leads are Tin/Lead

• MARKING: Body painted and part number, etc.

• POLARITY: No polarity marking for these

• Tape & Reel option: Standard per EIA-296

• Weight:

• See package dimensions on last page for both

is not exceeded.

1N6102 thru 1N6137A

Transient Suppressors

ESD and EFT protection per IEC6100-4-2 and

IEC61000-4-4 respectively

Secondary lightning protection per select levels

in IEC61000-4-5

Flexible axial-leaded mounting terminals

Nonsensitive to ESD per MIL-STD-750 Method

1020

Microsemi MicroNote 050

Military and other high reliability transient

protection

Extremely robust construction

Extensive range in Working Peak “Standoff”

Voltage (V

Available as either 500 W or 1500 W Peak Pulse

Power (P

Inherently radiation hard as described in

with Tungsten slugs

(Sn/Pb) over copper except for JANS with solid

Silver (Ag) and no finish

bidirectional TVSs

the “E” and “G” size packages

MECHANICAL AND PACKAGING

APPLICATIONS / BENEFITS

1270 mg for 1500 Watt (G Package)

750 mg for 500 Watt (E Package)

) using two different size packages

) from 5.2 to 152 V

“E” Package

APPEARANCE

“G” Package

Page 1

Related parts for 1N6131A

Related keywords

1N6131A datasheet
1N6131A data sheet
1N6131A pdf datasheet
1N6131A component
1N6131A part
1N6131A distributor
1N6131A RoHS
1N6131A datasheet download