ACX306 SONY [Sony Corporation], ACX306 Datasheet - Page 22

• Manufacturer Part Number: ACX306
• Description: 3.86cm (1.5 Type) NTSC/PAL Color LCD Panel
• Manufacturer: SONY [Sony Corporation]

Notes on Handling
(1) Static charge prevention
(2) Protection from dust and dirt
(3) Others
Be sure to take the following protective measures. TFT-LCD panels are easily damaged by static charges.
a) Use non-chargeable gloves, or simply use bare hands.
b) Use an earth-band when handling.
c) Do not touch any electrodes of a panel.
d) Wear non-chargeable clothes and conductive shoes.
e) Install grounded conductive mats on the working floor and working table.
f) Keep panels away from any charged materials.
g) Use ionized air to discharge the panels.
a) Operate in a clean environment.
b) When delivered, the panel surface (Polarizer) is not covered by a protective sheet. Take care of handling
c) Do not touch the polarizer surface. The surface is easily scratched. When cleaning, use a clean-room
d) Use ionized air to blow dust off the panel.
a) Do not twist or bend the flexible PC board especially at the connecting region because the board is
b) Do not drop the panel.
c) Do not twist or bend the panel or panel frame.
d) Keep the panel away from heat sources.
e) Do not dampen the panel with water or other solvents.
f) Avoid storage or use the panel at high temperatures or high humidity, as this may result in damage.
it so as not to damage the polarizer.
wiper with isopropyl alcohol. Be careful not to leave stains on the surface.
easily deformed.
– 22 –
ACX306AK