HMJ8_07 WJCI [WJ Communication. Inc.], HMJ8_07 Datasheet - Page 3

• Manufacturer Part Number: HMJ8_07
• Description: High Dynamic Range FET Mixer
• Manufacturer: WJCI [WJ Communication. Inc.]

WJ Communications, Inc
Land Pattern / Mounting Configuration
HMJ8
High Dynamic Range FET Mixer
US PAT. 5732345
x
Phone 1-800-WJ1-4401
HMJ8
Outline Drawing
x
.260
6.6
FAX: [phone]
.470
11.94
x
e-mail: [e-mail]
mm
inch
x
Web site: www.wj.com
Specifications and information are subject to change without notice
The component will be marked with an
“HMJ8”
alphanumeric lot number XXXX.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
1. Ground vias are critical for thermal and RF grounding
2. A minimum of 28 ground vias are required for 14 mil FR4
3. If your PCB design rules allow, ground vias should be placed
4. Trace width depends on the PCB material.
ESD Rating:
Value:
Test:
Standard:
ESD Rating:
Value:
Test:
Standard:
Mounting Config. Notes
considerations.
boards.
under the land pattern for better RF performance. Otherwise
ground vias should be placed as close to the land pattern as
possible.
Product Marking
ESD Information
designator
Class 2
Passes at 2000 V
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Class IV
Passes at 2000 V
Charged Device Model (CDM)
JEDEC Standard JESD22-C101
with
Page 3 of 3 May 2007
a
four-digit