SFSL4.5MDB YAMAR [Yamar Electronics Ltd.], SFSL4.5MDB Datasheet - Page 5

no-image

SFSL4.5MDB

Manufacturer Part Number
SFSL4.5MDB
Description
Independent DC-LIN Slave For Asynchronous Communication Over Noisy Lines
Manufacturer
YAMAR [Yamar Electronics Ltd.]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SFSL4.5MDB
Manufacturer:
KET
Quantity:
3 500
Change Frequency message:
This type of message consists of 5 bytes - sync break, sync field, “FE” Hex, “00” Hex and checksum.
The change frequency message identifier is “FE” Hex and the following data byte “00”Hex.
Upon reception of sync break, sync field, “FE” Hex and “00” Hex bytes the frequency changes from F1
to F0 or vise versa.
The device features Sleep mode for power saving. Entering Sleep and waking up are done either
locally by dedicated pins, or remotely through activity over the bus.
The ISL40 can enter sleep mode in the following ways:
1. Local device lowers its nSleep pin.
2. Remote master SIG40 device can enter the ISL40 device into Sleep Mode from Normal mode by
3. The AutoSleep pin is high and no reception occurred for about 8 seconds.
The ISL40 can wakeup by a remote SIG40 master or ISL40 device transmits a wakeup message over
the bus. During Sleep Mode, the ISL40 wakes up periodically to sense the bus for activity every
32mSec. If a wakeup message is detected, the ISL40 device raises pin INH and lowers pin HDO. If
nSleep pin is low upon remote waking up, the local device that lowered it must raise the nSleep back
high. Figure 3.6 shows the signals description.
A transition on pin Wake (caused by an external switch of the application) is used to wake the device.
The device then enters Standby mode, raises pin INH, and transmits a wakeup message to the bus.
While transmitting the wakeup message to the bus, the device lowers pin HDO. After the transmission
is complete the device raises pin HDO. After the transmission is completed the device enters Normal
© 2007 Yamar Electronics Ltd.
3.2.1
3.2.2
3.2.3
HDO
INH
3.2
DC-BUS
Sync break
transmitting the remote sleep message.
Sync break
Power Management
Entering Sleep mode
Remote wake up process
Wakeup from pin Wake
Proprietary and Confidential Information of YAMAR Electronics Ltd.
msg. detected
Sync Field
Sync Field
Figure 3.6 Frequency Change message
Figure 3.7 - Wakeup from bus message
Wakeup Message
Figure 3.5 Sleep message
0x3C
0xFE
5
Standby
Zero byte/bytes
Zero byte/bytes
Checksum
Checksum
DS-ISL40 R1.6
Normal
mode

Related parts for SFSL4.5MDB