PS7142-1A_06 CEL [California Eastern Labs], PS7142-1A_06 Datasheet - Page 10

• Manufacturer Part Number: PS7142-1A_06
• Description: 6-PIN DIP 400 V BREAK DOWN VOLTAGE 1-CH OPTICAL COUPLED MOS FET
• Manufacturer: CEL [California Eastern Labs]

RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
(2) Wave soldering
(3) Cautions
• Fluxes
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220°C
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2
Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
120ºC
(preheating)
120±30 s
180ºC
260°C or below (package surface temperature)
10 seconds or less
60 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% is recommended.)
Time (s)
(heating)
to 60 s
to 10 s
260ºC MAX.
220ºC
04/20/2005