MC1-516RX 3M, MC1-516RX Datasheet - Page 2

• Manufacturer Part Number: MC1-516RX
• Description: 3m mc1-516rx ring terminal, green, brazed, 1 awg, pk100...
• Manufacturer: 3M

Installation Information
UL Listed and CSA Certified for use on stranded copper
(AWG) wire only.
One crimp with the proper tool and dies, centered
between stripes on the barrel, secures the inserted
stripped conductor.
3M and Scotchlok are trademarks of 3M.
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
250
AWG
MCM
Wire
1/0
2/0
3/0
4/0
Size
or
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
2
1
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.
Wire Insulation
Strip Length
Inches
Barrel Crimp (Required)
Burndy
MY29-3
Setting
250
Scale
1/0
2/0
3/0
4/0
2
1
Crimp Tool & Dies
Orange
Purple
Purple
Brown
Green
Black
Pink
T & B
TBM5
Color
Die
none
none
Insert
AET
----
406
Die
C
C
B
B
Engineering Specification
Crimp-type terminals shall, electrically and mechanical-
ly, connect to a pre-stripped end of a stranded copper
wire, and have a flat tongue portion with a central open-
ing for mounting around a screw or stud.
The connector line shall offer barrel variations in wire
(AWG or MCM) size (#2 to 250 MCM). The connectors
shall be marked with the wire range and manufacturer’s
symbol ( ) and catalog number.
The non-insulated, seamless ring tongue terminal shall
be tin-plated, annealed copper, with the tongue having a
specified stud hole ( ˝ thru ˝) and a seamless barrel
with a beveled I.D. for ease of stranded wire entry, sized
for a specified (AWG) wire range (2 AWG thru 250
MCM).
© 3M 2002 78-8126-0606-5-A
Litho in USA.