IS46TR16128A-15HBLA1 ISSI, IS46TR16128A-15HBLA1 Datasheet - Page 42

• Manufacturer Part Number: IS46TR16128A-15HBLA1
• Description: DRAM 2G, 1.5v, 1333MT/s 128Mx16 DDR3
• Manufacturer: ISSI

Specifications of IS46TR16128A-15HBLA1

• Rohs: yes
• Data Bus Width: 16 bit
• Organization: 128 M x 16
• Package / Case: FBGA-96
• Memory Size: 2 Gbit
• Maximum Clock Frequency: 933 MHz
• Access Time: 13.125 ns
• Supply Voltage - Max: 1.575 V
• Supply Voltage - Min: 1.425 V
• Maximum Operating Current: 65 mA
• Maximum Operating Temperature: + 95 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT

IS43/46TR16128A, IS43/46TR16128AL,
IS43/46TR82560A, IS43/46TR82560AL
Notes:
1. The tolerance limits are specified after calibration with stable voltage and temperature. For the behavior of the tolerance limits if temperature or
2. The tolerance limits are specified under the condition that VDDQ=VDD and that VSSQ=VSS.
3. Pull-down and pull-up output driver impedances are recommended to be calibrated at 0.5xVDDQ. Other calibration schemes may be used to
4. Measurement definition for mismatch between pull-up and pull-down, MMPuPd:
5.7.2 Output Driver Temperature and Voltage sensitivity
If temperature and/or voltage after calibration, the tolerance limits widen according to the following table below.
5.7.2.1 Output Driver Sensitivity Definition
Note: dRONdT and dRONdV are not subject to production test but are verified by design and characterization.
Integrated Silicon Solution, Inc. – www.issi.com –
Rev. 00A
11/14/2012
Delta T = T - T(@calibration); Delta V = VDDQ - VDDQ(@calibration); VDD = VDDQ
RONPU@VOHdc
RONPD@VOLdc
RON@VOMdc
voltage changes after calibration, see following section on voltage and temperature sensitivity.
achieve the linearity spec shown above, e.g. calibration at 0.2 * VDDQ and 0.8 x VDDQ.
Measure RONPu and RONPd, both at 0.5 x VDDQ:
MMPuPd = [RONPu - RONPd] / RONNom x 100
Mismatch between pull-up and pull-down, MMPuPd
Items
0.9 - dRONdTM*lDelta Tl - dRONdVM*lDelta Vl
0.6 - dRONdTH*lDelta Tl - dRONdVH*lDelta Vl
0.6 - dRONdTL*lDelta Tl - dRONdVL*lDelta Vl
Min.
VOMdc= 0.5xVDDQ
VOMdc=0.5xVDDQ
VOHdc=0.8xVDDQ
1.1 + dRONdTM*lDelta Tl - dRONdVM*lDelta Vl
1.1 + dRONdTH*lDelta Tl - dRONdVH*lDelta Vl
1.1 + dRONdTL*lDelta Tl - dRONdVL*lDelta Vl
0.9
0.6
-10
Max.
1
1
+10
1.1
1.1
RZQ/6
RZQ/6
%
42
1,2,3
1,2,3
1,2,4
RZQ/7
RZQ/7
RZQ/7
Unit