STM32F302VBT6 STMicroelectronics, STM32F302VBT6 Datasheet - Page 22

• Manufacturer Part Number: STM32F302VBT6
• Description: ARM Microcontrollers - MCU 32-Bit ARM Cortex M4 72MHz 128kB MCU FPU
• Manufacturer: STMicroelectronics

Specifications of STM32F302VBT6

• Product Category: ARM Microcontrollers - MCU
• Rohs: yes
• Core: ARM Cortex M4
• Data Bus Width: 32 bit

Functional overview
3.13
3.14
3.15
22/133
Digital-to-analog converter (DAC)
Up to two 12-bit buffered DAC channels can be used to convert digital signals into analog
voltage signal outputs. The chosen design structure is composed of integrated resistor
strings and an amplifier in inverting configuration.
This digital interface supports the following features:
●
●
●
●
●
●
●
●
●
Operational amplifier (OPAMP)
The STM32F302xx/STM32F303xx embeds up to four operational amplifiers with external or
internal follower routing and PGA capability (or even amplifier and filter capability with
external components). When an operational amplifier is selected, an external ADC channel
is used to enable output measurement.
The operational amplifier features:
●
●
●
●
Fast comparators (COMP)
The STM32F302xx/STM32F303xx devices embed seven fast rail-to-rail comparators with
programmable reference voltage (internal or external), hysteresis and speed (low speed for
low power) and with selectable output polarity.
The reference voltage can be one of the following:
●
●
●
All comparators can wake up from STOP mode, generate interrupts and breaks for the
timers and can be also combined per pair into a window comparator
Up to two DAC output channels on STM32F303xB/STM32F303xC devices
8-bit or 10-bit monotonic output
Left or right data alignment in 12-bit mode
Synchronized update capability on STM32F303xB/STM32F303xC devices
Noise-wave generation
Triangular-wave generation
Dual DAC channel independent or simultaneous conversions on
STM32F303xB/STM32F303xC devices
DMA capability (for each channel on STM32F303xB/STM32F303xC devices)
External triggers for conversion
8.2 MHz bandwidth
0.5 mA output capability
Rail-to-rail input/output
In PGA mode, the gain can be programmed to be 2, 4, 8 or 16.
External I/O
DAC output pin
Internal reference voltage or submultiple (1/4, 1/2, 3/4). Refer to
internal reference voltage on page 60
reference voltage.
Doc ID 023353 Rev 5
for the value and precision of the internal
STM32F302xx/STM32F303xx
Table 26: Embedded