EFM32WG390F128 Energy Micro, EFM32WG390F128 Datasheet - Page 4

• Manufacturer Part Number: EFM32WG390F128
• Description: ARM Microcontrollers - MCU 128kb flash 32kb RAM
• Manufacturer: Energy Micro

Specifications of EFM32WG390F128

• Rohs: yes
• Core: ARM Cortex M4F
• Processor Series: EFM32WG390
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 48 MHz
• Program Memory Size: 128 KB
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.85 V to 3.8 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: BGA-112
• Mounting Style: SMD/SMT

2.1.3 Memory System Controller (MSC)
2.1.4 Direct Memory Access Controller (DMA)
2.1.5 Reset Management Unit (RMU)
2.1.6 Energy Management Unit (EMU)
2.1.7 Clock Management Unit (CMU)
2.1.8 Watchdog (WDOG)
2.1.9 Peripheral Reflex System (PRS)
2.1.10 External Bus Interface (EBI)
2012-09-11 - EFM32WG390FXX - d0193_Rev1.00
The Memory System Controller (MSC) is the program memory unit of the EFM32WG microcontroller.
The flash memory is readable and writable from both the Cortex-M4F and DMA. The flash memory is
divided into two blocks; the main block and the information block. Program code is normally written to
the main block. Additionally, the information block is available for special user data and flash lock bits.
There is also a read-only page in the information block containing system and device calibration data.
Read and write operations are supported in the energy modes EM0 and EM1.
The Direct Memory Access (DMA) controller performs memory operations independently of the CPU.
This has the benefit of reducing the energy consumption and the workload of the CPU, and enables
the system to stay in low energy modes when moving for instance data from the USART to RAM or
from the External Bus Interface to a PWM-generating timer. The DMA controller uses the PL230 µDMA
controller licensed from ARM.
The RMU is responsible for handling the reset functionality of the EFM32WG.
The Energy Management Unit (EMU) manage all the low energy modes (EM) in EFM32WG microcon-
trollers. Each energy mode manages if the CPU and the various peripherals are available. The EMU
can also be used to turn off the power to unused SRAM blocks.
The Clock Management Unit (CMU) is responsible for controlling the oscillators and clocks on-board the
EFM32WG. The CMU provides the capability to turn on and off the clock on an individual basis to all
peripheral modules in addition to enable/disable and configure the available oscillators. The high degree
of flexibility enables software to minimize energy consumption in any specific application by not wasting
power on peripherals and oscillators that are inactive.
The purpose of the watchdog timer is to generate a reset in case of a system failure, to increase appli-
cation reliability. The failure may e.g. be caused by an external event, such as an ESD pulse, or by a
software failure.
The Peripheral Reflex System (PRS) system is a network which lets the different peripheral module
communicate directly with each other without involving the CPU. Peripheral modules which send out
Reflex signals are called producers. The PRS routes these reflex signals to consumer peripherals which
apply actions depending on the data received. The format for the Reflex signals is not given, but edge
triggers and other functionality can be applied by the PRS.
The External Bus Interface provides access to external parallel interface devices such as SRAM, FLASH,
ADCs and LCDs. The interface is memory mapped into the address bus of the Cortex-M4F. This enables
seamless access from software without manually manipulating the IO settings each time a read or write
is performed. The data and address lines are multiplexed in order to reduce the number of pins required
Preliminary
...the world's most energy friendly microcontrollers
4
www.energymicro.com