MAX5893EVKIT Maxim Integrated, MAX5893EVKIT Datasheet - Page 6

• Manufacturer Part Number: MAX5893EVKIT
• Description: Digital to Analog Converters - DAC Evaluation Kit for the MAX5893/MAX5894/MAX5895
• Manufacturer: Maxim Integrated

Specifications of MAX5893EVKIT

• Number Of Converters: 2
• Conversion Rate: 500 MSPs
• Resolution: 12 bit
• Interface Type: Parallel
• Supply Voltage - Max: 1.89 V, 3.465 V
• Supply Voltage - Min: 1.71 V, 3.135 V

The MAX5893/MAX5894/MAX5895 EV kits feature on-
board reset circuitry that places the MAX5893/
MAX5894/MAX5895 SPI registers in their default state
after power-up. After power-up, the registers can be man-
ually reset by pressing switch SW1. If this button is
pressed, click the POR Reset button on the MAX5895 EV
kit software to synchronize the GUI with the hardware.
The MAX5893/MAX5894/MAX5895 EV kits provide pads
that allow an alternative SPI-compatible interface to be
MAX5893/MAX5894/MAX5895
Evaluation Systems/Evaluation Kits
8
_______________________________________________________________________________________
Using an Alternative SPI Interface
Reset Circuitry
used. Connect the CMOS-compatible interface through
the CS, DIN, DOUT, SCLK, and GND pads. The interface
is connected to level translators that automatically trans-
late the interface voltages to the MAX5893/
MAX5894/MAX5895 system voltages. Apply the positive
rail for the input side of the translators to the VMOD
pad. Use the GND pad adjacent to DVDD3.3 as the
ground reference.