CS4340-KSR Cirrus Logic, CS4340-KSR Datasheet - Page 21

• Manufacturer Part Number: CS4340-KSR
• Description: Digital to Analog Converters - DAC IC 24Bit 96kHz 101dB Stereo DAC
• Manufacturer: Cirrus Logic

Specifications of CS4340-KSR

• Product Category: Digital to Analog Converters - DAC
• Number Of Converters: 2
• Resolution: 24 bit
• Interface Type: Serial
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-16
• Minimum Operating Temperature: - 10 C
• Supply Voltage - Max: 5.5 V
• Supply Voltage - Min: 2.7 V

5. PARAMETER DEFINITIONS
Total Harmonic Distortion + Noise (THD+N)
Dynamic Range
Interchannel Isolation
Interchannel Gain Mismatch
Gain Error
Gain Drift
DS297F3
A measure of crosstalk between the left and right channels. Measured for each channel at the converter's
output with all zeros to the input under test and a full-scale signal applied to the other channel. Units in
decibels.
The ratio of the full scale rms value of the signal to the rms sum of all other spectral components over the
specified bandwidth. Dynamic range is a signal-to-noise measurement over the specified bandwidth
made with a -60 dBFS signal. 60 dB is then added to the resulting measurement to refer the measurement
to full scale. This technique ensures that the distortion components are below the noise level and do not
effect the measurement. This measurement technique has been accepted by the Audio Engineering
Society, AES17-1991, and the Electronic Industries Association of Japan, EIAJ CP-307.
A measure of crosstalk between the left and right channels. Measured for each channel at the converter’s
output with all zeros to the input under test and a full-scale signal applied to the other channel. Units in
decibels.
The gain difference between left and right channels. Units in decibels.
The deviation from the nominal full scale analog output for a full scale digital input.
The change in gain value with temperature. Units in ppm/°C.
CS4340
21