MAX9850EVCMOD2# Maxim Integrated, MAX9850EVCMOD2# Datasheet - Page 12

• Manufacturer Part Number: MAX9850EVCMOD2#
• Description: Audio D/A Converter ICs MAX9850 Evaluation System/Evaluation Kit
• Manufacturer: Maxim Integrated
• Series: MAX9850r

Specifications of MAX9850EVCMOD2#

• Resolution: 18 bit
• Interface Type: I2C
• Snr: 91 dB
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current: 7.6 mA
• Maximum Power Dissipation: 2857 mW
• Number Of Dacs: 1
• Output Voltage: 1.95 V
• Thd Plus Noise: 87 dB

MAX9850 Evaluation System/Evaluation Kit
Access to the MAX9850 analog inputs and outputs, is
provided through RCA jacks J3–J6. Access the
MAX9850 headphone outputs through the headphone
jack J8 or the provided LEFT, RIGHT, and GND pads.
The EV kit also features on-board level translators that
allow the on-board S/PDIF receiver to communicate
with the MAX9850 over the entire MAX9850 V
age range (1.8V to 3.6V). The CMOD232 command
module powers half of the on-board level translators.
Figure 12. MAX9850 EV Kit Software Receiver (Status) Tab
12
______________________________________________________________________________________
DD
volt-
For optimum performance, digital audio systems
require a stable frequency source. The MAX9850 EV kit
features an on-board 12MHz crystal oscillator. In addi-
tion, the MAX9850 EV kit can also use a user-provided
signal source that is connected to J9. Alternatively, the
S/PDIF recovered clock can be used. The MAX9850 ev
kit software controls which clock signal is routed to the
MCLK input (see the Clock Setup section for more
details).