TS5215CY5 RM Taiwan Semiconductor, TS5215CY5 RM Datasheet - Page 3

• Manufacturer Part Number: TS5215CY5 RM
• Description: Low Dropout Controllers - LDO 300mA Low Noise LDO Voltage Reg 2.5v
• Manufacturer: Taiwan Semiconductor

Specifications of TS5215CY5 RM

• Rohs: yes

Electrical Specification (Continue)
Note:
1. Exceeding the absolute maximum rating may damage the device.
2. The maximum allowable power dissipation at any Ta is Pd(max) = [T
3. The device is not guaranteed to function outside its operating rating.
4, Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature
5, Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for
6, Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal
7, Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn from
8, Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is
Block Diagrams
range.
applied, excluding load or line regulation effects. Specifications are for a 300mA load pulse at Vin=16V for t=10mS.
load regulation in the load range from 1mA to 300mA (5V version) and 1mA to 120mA (V
in output voltage due to heating effects are covered by the thermal regulation specification.
value measured at 1V differential.
the supply is the sum of the load current plus the ground pin current.
allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
3/9
Voltage Regulator with Enable
J(MAX)
- Ta] + Ө
300mA Low Noise LDO
JA
. Exceeding the maximum
OUT
<5V version). Changes
TS5215
Version: B07