APS25M5A016G-ACM Apacer, APS25M5A016G-ACM Datasheet - Page 11

• Manufacturer Part Number: APS25M5A016G-ACM
• Description: Solid State Drives - SSD SAFD25M4M SATA FLASH DRIVE MLC 16GB STD
• Manufacturer: Apacer

Specifications of APS25M5A016G-ACM

• Rohs: yes
• Product: SATA Flash Drives
• Memory Size: 16 GB
• Sustained Read: 115 MB/s
• Sustained Write: 26 MB/s
• Active Mode Current: 190 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 70 mm x 48.66 mm x 9.25 mm
• Minimum Operating Temperature: 0 C

4. Environmental Specifications
4.1
SAFD25M4-M environmental specifications follow the US Military Standard MIL-STD-810F, as shown in below
table.
4.2
Mean Time Between Failures (MTBF) is predicted based on reliability data for the individual components in
SAFD drive. Although many component of MTBF are given in databases and often these values are not really
accurate, the prediction result for the SAFD25M4-M is more than 1,000,000 hours.
Notes about the MTBF:
The MTBF is predicated and calculated based on “Telcordia Technologies Special Report, SR-332, Issue 2”
method.
4.3
SAFD25M4-M complies with the following standards:
© 2011 Apacer Technology Inc.
Note: extended operating temperature specifications are only available in 16, 32, 64GB capacities.
Environment
Temperature
Humidity
Vibration
Shock
Environments
Mean Time Between Failures (MTBF)
Certification and Compliance
CE – EN55022/55024
FCC 47CFR Part15 Class B
RoHS
MIL-STD-810F
SATA II (SATA Rev. 2.6)
Up to ATA/ATAPI-7 ( including S.M.A.R.T.)
Table 4-1 SAFD25M4-M environmental specifications
Serial ATA Flash Drive
APS25M5Axxxx-ACMX
-40 ~ +85°C (operating-extended)
0°C to 70°C (Operating – Standard),
Random: 20~2000(Hz), 7.7(Grms)
non-operating: 1500(G), 0.5(ms)
5% to 95% RH (Non-condensing)
-40°C to 100°C (Non-operating)
Sine wave: 10~2000(Hz), 15(G)
10
operating: 50(G), 11(ms)
Specification
Rev. 1.1