APS1845016G-CCM Apacer, APS1845016G-CCM Datasheet - Page 12

• Manufacturer Part Number: APS1845016G-CCM
• Description: Solid State Drives - SSD SAFD 18S4-M SATA FLASH DRIVE MLC 16GB
• Manufacturer: Apacer

Specifications of APS1845016G-CCM

• Rohs: yes
• Product: SATA Flash Drives
• Memory Size: 16 GB
• Sustained Read: 125 MB/s
• Sustained Write: 26 MB/s
• Active Mode Current: 190 mA
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Connector Type: 7-pin signal, 15-pin power
• Dimensions: 54 mm x 39.8 mm x 4 mm
• Minimum Operating Temperature: 0 C

4. Environment Specifications
4.1 Environments
SAFD18S4-M environmental specifications follow the US Military Standard MIL-STD-810F, as shown in below
table.
4.2
Mean Time Between Failures (MTBF) is predicted based on reliability data for the individual components in
SAFD drive. Although many component of MTBF are given in databases and often these values are not really
accurate, the prediction result for the SAFD18S4-M is more than 1,000,000 hours.
Notes about the MTBF:
The MTBF is predicated and calculated based on “Telcordia Technologies Special Report, SR-332, Issue 2”
method.
4.3
SAFD18S4-M complies with the following standards:
©2012 Apacer Technology Inc.






Note: extended operating temperature specifications are only available in 16, 32, 64GB capacities.
Environment
Temperature
Humidity
Vibration
Shock – Operating
Mean Time Between Failures (MTBF)
Certification and Compliance
CE – EN55022/55024
FCC 47CFR Part15 Class B
RoHS
MIL-STD-810F
SATA II (SATA Rev. 2.6)
Up to ATA/ATAPI-7 ( including S.M.A.R.T.)
Table 4-1 SAFD18S4-M environmental specifications
0°C to 70°C (Operating-standard),
Serial ATA Flash Drive
APS1845xxxx-ACMX
Random :
Sine wave :
5% to 95% RH (Non-condensing)
Peak acceleration: 50 G, 11 ms
-40°C to 100°C (Non-operating)
Acceleration: 1,500 G, 0.5 ms
11
7.7(Grms), 20~2000(Hz)
Specification
15(G), 10~2000(Hz),
-40 ~ +85°C (operating-extended)
Rev. 1.3