VNH5180ATR-E STMicroelectronics, VNH5180ATR-E Datasheet - Page 5

• Manufacturer Part Number: VNH5180ATR-E
• Description: Motor / Motion / Ignition Controllers & Drivers Automotive H-Bridge 180mOhm 8A 41V VCC
• Manufacturer: STMicroelectronics
• Type: Automotive Fully Integrated H-Bridge Motor Driverr

Specifications of VNH5180ATR-E

• Product Category: Motor / Motion / Ignition Controllers & Drivers
• Rohs: yes
• Product: Fan / Motor Controllers / Drivers
• Operating Supply Voltage: 5.5 V to 18 V
• Supply Current: 6 mA
• Mounting Style: SMD/SMT
• Package / Case: PowerSSO-36

VNH5180A-E
1
Block diagram and pin description
Figure 1.
Table 2.
Logic control
Undervoltage
High-side and low-side clamp voltage
High-side and low-side driver
Current limitation
High-side and low-side overtemperature
protection
Low-side overload detector
Fault detection
Power limitation
Block diagram
Block description
Name
Doc ID 17074 Rev 5
Allows the turn-on and the turn-off of the high-side and the
low-side switches according to the truth table.
Shuts down the device for battery voltage lower than 5V.
Protect the high-side and the low-side switches from the
high voltage on the battery line.
Drive the gate of the concerned switch to allow a proper
R
Limits the motor current in case of short circuit.
In case of short-circuit with the increase of the junction
temperature, it shuts down the concerned driver to prevent
degradation and to protect the die.
Detects when low side current exceeds shutdown current
and latches off the concerned Low side.
Signalizes the abnormal behaviour of the switch (output
shorted to ground or output shorted to battery) by pulling
down the concerned ENx/DIAGx pin.
Limits the power dissipation of the high-side driver inside
safe range in case of short to ground condition.
DS(on)
for the leg of the bridge.
Block diagram and pin description
Description
5/31