AT27C020-55PU Atmel, AT27C020-55PU Datasheet - Page 9

• Manufacturer Part Number: AT27C020-55PU
• Description: IC OTP 2MBIT 55NS 32DIP
• Manufacturer: Atmel

Specifications of AT27C020-55PU

• Format - Memory: EPROMs
• Memory Type: OTP EPROM
• Memory Size: 2M (256K x 8)
• Speed: 55ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-DIP (0.600", 15.24mm)
• Organization: 256 K x 8
• Access Time: 55 ns
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Maximum Operating Temperature: 85 C
• Interface Type: Parallel
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Capacitance, Input: 4 pF
• Capacitance, Output: 8 pF
• Current, Input, Leakage: ±1 μA
• Current, Operating: 25 mA (Read)
• Current, Output, Leakage: ±5
• Density: 2M
• Package Type: PDIP
• Temperature, Operating: -40 to +85 °C
• Time, Access: 55 ns
• Time, Address Setup: 2
• Time, Fall: 20 ns
• Time, Rise: 20 ns
• Voltage, Esd: 2000 V
• Voltage, Input, High: 5.5 V (Read)
• Voltage, Input, Low: 0.8 V (Read)
• Voltage, Output, High: 2.4 V (Read)
• Voltage, Output, Low: 0.4 V (Read)
• Voltage, Supply: 5 V
• Memory Configuration: 256K X 8
• Supply Voltage Range: 4.5V To 5.5V
• Memory Case Style: PDIP
• No. Of Pins: 32
• Operating Temperature Range: -40°C To
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

18. Rapid Programming Algorithm
0570G–EPROM–12/07
A 100 µs PGM pulse width is used to program. The address is set to the first location. V
raised to 6.5V and V
PGM pulse without verification. Then a verification/reprogramming loop is executed for each
address. In the event a byte fails to pass verification, up to 10 successive 100 µs pulses are
applied with a verification after each pulse. If the byte fails to verify after 10 pulses have been
applied, the part is considered failed. After the byte verifies properly, the next address is
selected until all have been checked. V
are read again and compared with the original data to determine if the device passes or fails.
PP
is raised to 13.0V. Each address is first programmed with one 100 µs
PP
is then lowered to 5.0V and V
CC
AT27C020
to 5.0V. All bytes
CC
is
9