M95040-WDW6TP STMicroelectronics, M95040-WDW6TP Datasheet - Page 24

• Manufacturer Part Number: M95040-WDW6TP
• Description: IC EEPROM 4KBIT 10MHZ 8TSSOP
• Manufacturer: STMicroelectronics

Specifications of M95040-WDW6TP

• Format - Memory: EEPROMs - Serial
• Memory Type: EEPROM
• Memory Size: 4K (512 x 8)
• Speed: 10MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-TSSOP
• Organization: 512 x 8
• Interface Type: SPI
• Maximum Clock Frequency: 5 MHz
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Maximum Operating Current: 2 mA
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 3.3 V, 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8679-2; M95040-WDW6TP

Power-up and delivery states
7
7.1
7.2
24/43
Power-up and delivery states
Power-up state
After Power-up, the device is in the following state:
●
●
●
●
●
The BP1 and BP0 bits of the Status register are unchanged from the previous power-down
(they are non-volatile bits).
Initial delivery state
The device is delivered with the memory array set at all 1s (FFh). The Block Protect (BP1
and BP0) bits are initialized to 0.
low power Standby Power mode
deselected (after Power-up, a falling edge is required on Chip Select (S) before any
instructions can be started).
not in the Hold Condition
the Write Enable Latch (WEL) is reset to 0
Write In Progress (WIP) is reset to 0
Doc ID 6512 Rev 8
M95040, M95020, M95010