WIZ1000-US WIZnet, WIZ1000-US Datasheet - Page 21

• Manufacturer Part Number: WIZ1000-US
• Description: Ethernet Modules 1 PORT SERIAL-ENET DEVICE SERVER 110V
• Manufacturer: WIZnet

Specifications of WIZ1000-US

• Rohs: yes
• Product: Serial to Ethernet Servers
• Interface Type: RS-232
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 70 C
• Dimensions: 75 mm x 45 mm
• Minimum Operating Temperature: 0 C

Copyright © WIZnet All Rights Reserved
Inactivity Time also can be useful for the case when the server system is unexpectedly shut
down. In this status, if there is not any data communication during the time defined in the
Inactivity time, WIZ1000 will close the connection and enter into listening status.
ⓤ
Keep-alive packet is usually used to check whether the other side is alive or not. Users can
define the interval of sending keep-alive packet here, and timer will be started when there is no
data to delivery between WIZ1000 and the other side. The interval can be set between 0~65535
seconds, and 0 means the keep-alive timer is disabled that no keep-alive packet will be sent.
ⓥ
This function is for module configuration not through network with Configuration tool but
through serial communication. When you want to set via serial communication, check
“enable”. Please detail about serial configuration refers to “4. Serial Configuration”.
ⓦ
For the security issues, WIZ1000 can have its own password for searching. The password is
stored in the EEPROM of WIZ1000, and it can be modified via this configuration tool. The
password can be any alphabet or number. Its length can be variable and its maximum length
is 8 bytes. The password is case sensitive and the default password is ‘wiznet’.
ⓧ
‘Connection Password’ function is for blocking client’s access which is not allowed.
’Connection Password’ function can be operated only in ‘TCP Server’ mode. When ‘password’
function operates, clients should input password to access.
1.
2. Select ‘Server’ of “Operation Mode”.
Keep Alive Interval
Serial Configuration Mode Switch Code
Connection Password
Search Password
Execute Configuration Tool program.(Configuration Tool version should be 2.1 or above)
WIZ1000 | 21 page