24LC04BT-E/MNY Microchip Technology, 24LC04BT-E/MNY Datasheet

IC EEPROM 4KBIT 400KHZ 8TDFN

24LC04BT-E/MNY

Manufacturer Part Number
24LC04BT-E/MNY
Description
IC EEPROM 4KBIT 400KHZ 8TDFN
Manufacturer
Microchip Technology
Datasheets

Specifications of 24LC04BT-E/MNY

Memory Size
4K (2 x 256 x 8)
Package / Case
8-TDFN
Format - Memory
EEPROMs - Serial
Memory Type
EEPROM
Speed
400kHz
Interface
I²C, 2-Wire Serial
Voltage - Supply
2.5 V ~ 5.5 V
Operating Temperature
-40°C ~ 125°C
Organization
2 Block x 256 x 8
Interface Type
I2C
Maximum Clock Frequency
0.4 MHz
Access Time
900 ns
Supply Voltage (max)
5.5 V
Supply Voltage (min)
2.5 V
Maximum Operating Current
3 mA
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
Operating Supply Voltage
3.3 V, 5 V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Device Selection Table
Features:
• Single Supply with Operation Down to 1.7V for
• Low-Power CMOS Technology:
• 2-Wire Serial Interface, I
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 3 ms, typical
• Self-Timed Erase/Write Cycle
• 8-Byte Page Write Buffer
• Hardware Write-Protect
• ESD Protection >4,000V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 Years
• Factory Programming Available
• Packages include 8-lead PDIP, SOIC, TSSOP,
• Pb-free and RoHS Compliant
• Temperature Ranges:
© 2008 Microchip Technology Inc.
24AA02
24LC02B
Note 1:
Number
24AA02 Devices, 2.5V for 24LC02B Devices
- Read current 1 mA, max.
- Standby current 1 μA, max. (I-temp)
DFN, MSOP, 5-lead SOT-23 and SC-70
- Industrial (I):
- Automotive (E): -40°C to +125°C
Part
100 kHz for V
Range
1.7-5.5
2.5-5.5
V
CC
-40°C to +85°C
CC
2
C™ Compatible
400 kHz
400 kHz
Max. Clock
<2.5V
Frequency
2K I
(1)
2
24AA02/24LC02B
Ranges
C
Temp.
I, E
I
Serial EEPROM
Description:
The Microchip Technology Inc. 24AA02/24LC02B
(24XX02*) is a 2 Kbit Electrically Erasable PROM. The
device is organized as one block of 256 x 8-bit memory
with a 2-wire serial interface. Low-voltage design
permits operation down to 1.7V, with standby and
active currents of only 1 μA and 1 mA, respectively.
The 24XX02 also has a page write capability for up to
8 bytes of data. The 24XX02 is available in the
standard 8-pin PDIP, surface mount SOIC, TSSOP, 2x3
DFN and MSOP packages and is also available in the
5-lead SOT-23 and SC-70 packages.
Package Types
Block Diagram
V
SDA
SDA
I/O
A0
A1
A2
SCL
SS
Vss
Note:
Control
V
V
Logic
CC
SS
I/O
1
2
3
4
SCL
SOT-23/SC-70
2
3
PDIP, MSOP
1
Pins A0, A1 and A2 are not used by the 24XX02. (No
internal connections).
WP
Control
Memory
4
5
Logic
8
7
6
5
WP
Vcc
V
WP
SCL
SDA
CC
V
A0
A1
A2
SS
V
XDEC
A0
A2
A1
SS
1
2
3
4
SOIC, TSSOP
1
2
3
4
DS21709H-page 1
DFN
Sense Amp.
R/W Control
Generator
EEPROM
Latches
YDEC
Page
HV
Array
8
7
6
5
8
7
6
5
V
SCL
SDA
WP
CC
V
WP
SCL
SDA
CC

Related parts for 24LC04BT-E/MNY

24LC04BT-E/MNY Summary of contents

Page 1

... Microchip Technology Inc. 24AA02/24LC02B 2 ™ C Serial EEPROM Description: Temp. The Microchip Technology Inc. 24AA02/24LC02B Ranges (24XX02 Kbit Electrically Erasable PROM. The device is organized as one block of 256 x 8-bit memory I with a 2-wire serial interface. Low-voltage design I, E permits operation down to 1.7V, with standby and active currents of only 1 μ ...

Page 2

... CC = +1.7V to +5. +2.5V to +5.5V CC Conditions — — — (Note 3 OUT 5.0V (Note 25° MHz A CLK V = 5.5V, SCL = 400 kHz CC — Industrial Automotive SDA = SCL = © 2008 Microchip Technology Inc. ...

Page 3

... This eliminates the need for a 4: This parameter is not tested but ensured by characterization. For endurance estimates in a specific application, please consult the Total Endurance™ Model which can be obtained from Microchip’s web site at www.microchip.com. © 2008 Microchip Technology Inc. 24AA02/24LC02B Industrial (I -40°C to +85°C, V ...

Page 4

... FIGURE 1-1: BUS TIMING DATA 5 3 SCL 7 6 SDA 14 IN SDA OUT FIGURE 1-2: BUS TIMING START/STOP SCL 6 7 SDA Start DS21709H-page Stop © 2008 Microchip Technology Inc. ...

Page 5

... DATA TRANSFER SEQUENCE ON THE SERIAL BUS (A) (B) SCL SDA Start Condition © 2008 Microchip Technology Inc. 24AA02/24LC02B 3.4 Data Valid (D) The state of the data line represents valid data when, after a Start condition, the data line is stable for the duration of the high period of the clock signal. ...

Page 6

... Block Select Code Read Block Address 1010 Write Block Address 1010 DS21709H-page 6 FIGURE 3-2: Control Code Slave Address Start Bit x = “don’t care” R CONTROL BYTE ALLOCATION Read/Write Bit Block Select Bits R/W ACK Acknowledge Bit © 2008 Microchip Technology Inc. ...

Page 7

... Bus Activity Block Select Bits x = don’t care © 2008 Microchip Technology Inc. 24AA02/24LC02B master has transmitted a Stop condition. Upon receipt of each word, the four lower-order Address Pointer bits are internally incremented by ‘ bits of the word address remain constant. If the master ...

Page 8

... Send Start Send Control Byte with R Did Device No Acknowledge (ACK = 0)? Yes Next Operation DS21709H-page 8 6.0 WRITE PROTECTION The WP pin allows the user to write-protect the entire array (00-FF) when the pin is tied the write protection is disabled. © 2008 Microchip Technology Inc tied ...

Page 9

... R T SDA Line S Bus Activity x = “don’t care” © 2008 Microchip Technology Inc. 24AA02/24LC02B 7.3 Sequential Read Sequential reads are initiated in the same way as a random read, except that once the 24XX02 transmits the first data byte, the master issues an acknowledge as opposed to a Stop condition in a random read ...

Page 10

... SDA Line Block Select Bus Activity x = “don’t care” FIGURE 7-3: SEQUENTIAL READ Bus Activity Control Master Byte Data (n) SDA Line Bus Activity K DS21709H-page Word Control A Address (n) Byte Block Select Bits Bits Data ( Data ( Data ( Data ( © 2008 Microchip Technology Inc. ...

Page 11

... SCL low. Changes during SCL high are reserved for indicating Start and Stop conditions. 8.2 Serial Clock (SCL) The SCL input is used to synchronize the data transfer to and from the device. © 2008 Microchip Technology Inc. 24AA02/24LC02B DFN MSOP SOT23 1 ...

Page 12

... SOIC (3.90 mm) XXXXXXXT XXXXYYWW NNN 8-Lead TSSOP XXXX TYWW NNN 8-Lead MSOP XXXXXT YWWNNN 5-Lead SOT-23 XXNN DS21709H-page 12 Example: 24LC02B e I/P 13F 3 0527 Example: 24LC02BI 0527 13F Example: 4L02 I527 13F Example: 4L2BI 52713F Example: M23F © 2008 Microchip Technology Inc. ...

Page 13

... Note: Please visit www.microchip.com/Pbfree for the latest information on Pb-free conversion. *Standard OTP marking consists of Microchip part number, year code, week code, and traceability code. © 2008 Microchip Technology Inc. 24AA02/24LC02B Example: B43F Example: ...

Page 14

... DS21709H-page 14 © 2008 Microchip Technology Inc. ...

Page 15

... Microchip Technology Inc. 24AA02/24LC02B α φ β DS21709H-page 15 ...

Page 16

... DS21709H-page 16 © 2008 Microchip Technology Inc. ...

Page 17

... Microchip Technology Inc. 24AA02/24LC02B φ I DS21709H-page 17 ...

Page 18

... DS21709H-page 18 I © 2008 Microchip Technology Inc. φ ...

Page 19

... Microchip Technology Inc. 24AA02/24LC02B I φ DS21709H-page 19 ...

Page 20

... DS21709H-page 20 © 2008 Microchip Technology Inc. ...

Page 21

... Microchip Technology Inc. 24AA02/24LC02B DS21709H-page 21 ...

Page 22

... DS21709H-page 22 © 2008 Microchip Technology Inc. ...

Page 23

... Microchip Technology Inc. 24AA02/24LC02B DS21709H-page 23 ...

Page 24

... Revision F (01/2007) Revised Features section; Changed 1.8V to 1.7V in Tables and text; Revised Ambient Temperature, Section 1.0; Replaced Package Drawings; Revised Product ID section. Revision G (03/2007) Replaced Package Drawings (Rev. AM). Revision H (08/2008) Added SC-70 Package; Updated Package Drawings. DS21709H-page 24 © 2008 Microchip Technology Inc. ...

Page 25

... To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. © 2008 Microchip Technology Inc. 24AA02/24LC02B CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • ...

Page 26

... What deletions from the document could be made without affecting the overall usefulness there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS21709H-page 26 Total Pages Sent ________ FAX: (______) _________ - _________ N Literature Number: DS21709H © 2008 Microchip Technology Inc. ...

Page 27

... Plastic TSSOP (4.4 mm), 8-lead MS = Plastic Micro Small Outline (MSOP), 8-lead OT = SOT-23, 5-lead (Tape and Reel only SC-70, 5-lead (Tape and Reel only) © 2008 Microchip Technology Inc. 24AA02/24LC02B Examples: a) 24AA02-I/P: Industrial Temperature, 1.7V, PDIP package 24AA02-I/SN: Industrial Temperature, b) 1.7V, SOIC package 2 ...

Page 28

... NOTES: DS21709H-page 28 © 2008 Microchip Technology Inc. ...

Page 29

... PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 30

... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2008 Microchip Technology Inc. EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...

Related keywords