MAX11040KDBEVKIT# Maxim Integrated, MAX11040KDBEVKIT# Datasheet - Page 4

• Manufacturer Part Number: MAX11040KDBEVKIT#
• Description: Data Conversion IC Development Tools MAX5135/11040/11612 Eval Kit w/ FMC
• Manufacturer: Maxim Integrated
• Series: MAX11040K, MAX11060r

Specifications of MAX11040KDBEVKIT#

• Rohs: yes

• MAX11040K EV kit (USB cable included)
• +3.3V analog supply voltage
• +3.3V digital supply voltage
• Signal source from -2.2V to +2.2V
• User-supplied Windows 2000/XP or Windows Vista
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
underlined refers to items from the Windows operating
system.
The EV kit is fully assembled and tested. Follow the
steps below to verify board operation. Caution: Do not
turn on power supplies until all connections are
completed.
1) Visit
2) Make sure that the shunts of all jumpers are in the
3) Connect the analog voltage supply to the AVDD
4) Connect the digital voltage supply to the DVDD and
5) Turn on the power supply.
6) Connect the negative terminal or ground terminal of
7) Set the signal source to generate a 60Hz, 2V peak-
MAX11040K Evaluation Kit/Daughterboard
4
PC with a spare USB port
load the latest version of the EV kit software,
11040KRxx.ZIP. Save the EV kit software to a tem-
porary folder and uncompress the ZIP file.
default positions, as shown in Table 1.
and AGND connectors.
DGND connectors.
the signal source to the negative input (‘-’) on J3
(AIN0 on U1), and the positive terminal of the signal
source to the positive input (‘+’) on J3.
to-peak sinusoidal wave.
_______________________________________________________________________________________
www.maxim-ic.com/evkitsoftware
Recommended Equipment
Quick Start
Procedure
to down-
8) Install the MAX11040K evaluation software on your
9) Connect the USB cable from the PC to the EV kit. A
10) Follow the directions of the Add New Hardware
11) Start the EV kit software by opening its icon in the
12) Wait until the program automatically detects the
13) Press the Start Conversion button in the Data
14) Press the Calculate button and verify that the
computer by running the INSTALL.EXE program
inside the temporary folder. The program files are
copied and icons are created for them in the
Windows Start | Programs menu.
Building Driver Database window pops up in addi-
tion to a New Hardware Found message when
installing the USB driver for the first time. If a win-
dow that is similar to the one described above is not
seen after 30s, remove the USB cable from the EV
kit and reconnect it. Administrator privileges are
required to install the USB device driver on
Windows.
Wizard to install the USB device driver. Choose the
Search for the best driver for your device option.
Specify the location of the device driver to be
C:\Program Files\MAX11040K using the Browse
button. During device driver installation, Windows
may show a warning message indicating that the
device driver Maxim uses does not contain a digital
signature. This is not an error condition and it is
safe to proceed with installation. Refer to the
USB_Driver_Help.PDF document included with the
software for additional information.
Start | Programs menu.
MAX11040K hardware and displays the user-inter-
face panel (Figure 1).
Logging group box.
Frequency of 60Hz, the MIN value of -1V, and the
MAX value of 1V are displayed in the Calculation
group box.