AT25DF161-MH-Y Atmel, AT25DF161-MH-Y Datasheet - Page 29

IC FLASH 16MBIT 100MHZ 8UDFN

AT25DF161-MH-Y

Manufacturer Part Number
AT25DF161-MH-Y
Description
IC FLASH 16MBIT 100MHZ 8UDFN
Manufacturer
Atmel
Datasheet

Specifications of AT25DF161-MH-Y

Format - Memory
FLASH
Memory Type
DataFLASH
Memory Size
16M (2M x 8)
Speed
100MHz
Interface
SPI, RapidS
Voltage - Supply
2.7 V ~ 3.6 V
Operating Temperature
-40°C ~ 85°C
Package / Case
8-UDFN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT25DF161-MH-Y
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
3687E–DFLASH–11/10
10.5
The Program OTP Security Register command utilizes the internal 256-buffer for processing. Therefore, the contents of
the buffer will be altered from its previous state when this command is issued.
Figure 10-4. Program OTP Security Register
Read OTP Security Register
The OTP Security Register can be sequentially read in a similar fashion to the Read Array operation up to the maximum
clock frequency specified by f
77h must be clocked into the device. After the opcode has been clocked in, the three address bytes must be clocked in to
specify the starting address location of the first byte to read within the OTP Security Register. Following the three address
bytes, two dummy bytes must be clocked into the device before data can be output.
After the three address bytes and the dummy bytes have been clocked in, additional clock cycles will result in OTP Security
Register data being output on the SO pin. When the last byte (00007Fh) of the OTP Security Register has been read, the
device will continue reading back at the beginning of the register (000000h). No delays will be incurred when wrapping
around from the end of the register to the beginning of the register.
Deasserting the CS pin will terminate the read operation and put the SO pin into a high-impedance state. The CS pin can
be deasserted at any time and does not require that a full byte of data be read.
Figure 10-5. Read OTP Security Register
SCK
SCK
SO
CS
SO
CS
SI
SI
MAX
. To read the OTP Security Register, the CS pin must first be asserted and the opcode of
Atmel AT25DF161
29

Related parts for AT25DF161-MH-Y