EV-ADF4360-4EB1Z Analog Devices, EV-ADF4360-4EB1Z Datasheet - Page 5

• Manufacturer Part Number: EV-ADF4360-4EB1Z
• Description: Clock & Timer Development Tools Evaluation Board I.C.
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF4360-4EB1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF4360-4
• Frequency: 250 MHz, 1.75 GHz
• Operating Supply Voltage: 9 V
• Interface Type: USB
• Operating Supply Current: 50 mA
• Factory Pack Quantity: 1

Evaluation Board User Guide
WINDOWS VISTA OS AND WINDOWS 7 (32-BIT) OS
For Windows Vista or Windows 7 (32-bit), if the device drivers
do not install automatically, you will have to manually install
the drivers. To do so, use the following steps:
1.
2.
Find the new unknown device (the evaluation board)
in Device Manager and double-click it to open the
properties. The device should be Unknown device,
under Other devices (see Figure 5).
Click Update Driver in the properties window (see
Figure 6).
Figure 6. Unknown Device Properties
Figure 5. Device Manager
Rev. A | Page 5 of 12
3.
4.
5.
6.
7.
WINDOWS 7 64-BIT OS
The Windows 7 64-bit system uses a different driver than 32-bit
system. To install this driver:
1.
2.
3.
4.
Note that installing this driver package disables older versions
of Analog Devices PLL software; therefore, only install if needed.
On the Update Driver Software dialog box, choose
Browse my computer for driver software.
Browse to C:\Program Files\Analog Devices\ADF4360.
Click OK or Next.
If prompted by Windows security, choose Install this
driver software anyway.
If the installation is successful, the message in Figure 7
appears.
Disconnect the USB evaluation board.
Open ADF4360_setup.msi.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
Connect your USB evaluation board. The driver should be
found automatically.
Figure 7. Successful Installation
UG-099