uEZGUI-1788-70WVT FDI, uEZGUI-1788-70WVT Datasheet - Page 8
![no-image](/images/no-image-200.jpg)
uEZGUI-1788-70WVT
Manufacturer Part Number
uEZGUI-1788-70WVT
Description
Display Development Tools uEZ GUI LPC1788 Dev 7" WVGA Touch LCD
Manufacturer
FDI
Datasheet
1.UEZGUI-1788-70WVT.pdf
(20 pages)
Specifications of uEZGUI-1788-70WVT
Product Category
Display Development Tools
Rohs
yes
Product
Development Kits
Tool Is For Evaluation Of
LPC1788
Interface Type
Serial
Operating Supply Voltage
5 V
9. Configuring IAR EWARM v6.10 for J‐Link Flashing
The IAR tools do not require any special configuration for configuring the J‐Link tools. To update IAR’s J‐Link dll you just
need to run Segger’s J‐Link DLL Updated and select the IAR install you wish to update and click Ok.
2) Plug in the J‐Link device into the PC and install any drivers as directed. The Segger J‐Link drivers can be found at
3) Plug in the J‐Link’s JTAG connector to the uEZGUI board at J3 with the JTAG adapter.
4) Select Target menu and choose Targets. The following list will appear to the right.
5) Right click on “Segger J‐Link” and select Properties
6) If programming a blank LPC1788 part, select a Speed of 100. If the part has already been programmed, select a
7) Go back to menu Target and select “Connect Segger J‐Link”
8) Compile the application and press F5 to download and start debugging.
http://www.segger.com/cms/jlink‐software.html with additional information at
http://www.segger.com/cms/development‐tools.html.
Speed of 1000.
7