EV-ADF4360-5EB1Z Analog Devices, EV-ADF4360-5EB1Z Datasheet - Page 4

• Manufacturer Part Number: EV-ADF4360-5EB1Z
• Description: Clock & Timer Development Tools Evaluation Board I.C.
• Manufacturer: Analog Devices
• Type: PLL Synthesizers / Multipliers / Dividersr

Specifications of EV-ADF4360-5EB1Z

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: ADF4360-5
• Frequency: 250 MHz, 1.4 GHz
• Operating Supply Voltage: 9 V
• Interface Type: USB
• Operating Supply Current: 45 mA
• Factory Pack Quantity: 1

UG-100
EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
It is vital to install the software before connecting the board
to the PC. The control software and USB drivers for
ADF4360-5EBZ1
on a CD. To install the software, use the following steps:
1.
2.
The software requires Microsoft’s .NET Framework Version 3.5
or later to be installed on your machine. The installer automati-
cally downloads the framework from the Microsoft website if you
do not have this installed. If you do not have an Internet connec-
tion or have a slow connection on the PC, you can install the
.NET Framework directly from the CD. Do this by double-clicking
dotnetfx.exe. Once installed, run ADF4360_Setup.msi again.
WINDOWS XP OS
After you have installed the software, install the USB drivers.
To do so, use the following steps:
1.
2.
Open ADF4360_setup.msi.
The install wizard guides you through the installation
process. The software is installed in a default directory called
C:/Program Files/Analog Devices/ADF4360.
Plug a USB cable into the USB connector on the evaluation
board. The Found New Hardware box opens. See Figure 3.
Choose Install from a list or specified location (Advanced).
accompany the
Figure 3. New Hardware Wizard
EVAL-ADF4360-5EBZ1
EVAL-
Rev. A | Page 4 of 12
3.
If the installation is successful, the message in Figure 4 appears.
Click Continue Anyway when asked about Windows Logo
testing.
Evaluation Board User Guide
Figure 4. Successful Installation