EVB-B1+ WIZnet, EVB-B1+ Datasheet - Page 18

• Manufacturer Part Number: EVB-B1+
• Description: Development Boards & Kits - ARM W3150A+EVAL BOARD BASED ON AVR
• Manufacturer: WIZnet

Specifications of EVB-B1+

• Rohs: yes
• Product: Evaluation Boards
• Interface Type: RS-232, SPI
• Operating Supply Voltage: 3.3 V, 5 V
• Data Bus Width: 8 bit
• Dimensions: 50 mm x 40 mm
• Processor Series: ATmega128

2.4. EVB B/D Test
The firmware of EVB B/D can be divided into Manage Program and EVB B/D Test Application.
Manage Program performs system configuration to run EVB B/D, and EVB B/D Test Application is Network
Application Program for W3150A
2.4.1.
Manage Program is a program that is executed upon receiving character ‘M’ or ‘m’ from the terminal program
within 7 seconds when doing the manual reset of EVB B/D and EVB B/D power on. This program sets up the
channel application of W3150A
2.4.1.1.
It selects Network Information that is used in EVB B/D. When choosing ‘1’ at terminal Program of <Fig 2.8>,
Network Information of EVB B/D can be set as desired. The default Network Information of EVB B/D is
shown in <Table 2-2>.
If “Network Config” menu is selected on Manage Program, menu shown in <Fig 2.9> can be displayed and
each function is described in <Table 2-3>.
Manage Program
Network Configuration
© Copyright 2006 WIZnet Co., Inc. All rights reserved.
<Table 2-2 : EVB B/D Default Network Information>
MAC Address
Source IP Address
Gateway IP Address
Subnet Mask
DNS Server IP Address
Network Information
+
to be tested, and perform certain ping request test with DNS server.
+
<Fig 2.8:Manage Program Execution >
Test.
00.08.DC.00.00.00
192.168.0.2
192.168.0.1
255.255.255.0
0.0.0.0
Default Value
8