MIKROE-1043 mikroElektronika, MIKROE-1043 Datasheet - Page 10

• Manufacturer Part Number: MIKROE-1043
• Description: Development Boards & Kits - ARM EasyMxPRO v7 MCU Stellaris LM4F232H5Q
• Manufacturer: mikroElektronika

Specifications of MIKROE-1043

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: LM4F232H5Q
• Core: ARM Cortex M3, ARM Cortex M4
• Interface Type: CAN, I2C, SPI
• Operating Supply Voltage: 7 V to 23 V
• Data Bus Width: 8 bit
• Dimensions: 266 mm x 220 mm
• For Use With: LM4F232H5Q

page 10
Figure 4-3: On-board MCU
socket has silkscreen
markings which will help
you to correctly orient the
MCU card before inserting.
How to properly place your MCU card into the socket?
Before you plug the microcontroller card into
the socket, make sure that the power supply is
turned off. Images below show how to correctly
plug the MCU card. First make sure that MCU card
orientation matches the silkscreen outline on the
1
EasyMx PRO
Place the MCU card over the socket so each male
header is properly aligned with the female socket
as shown in Figure 4-4. Then put the MCU card
slowly down until all the pins match the socket.
Figure 4-4:
Place the
MCU card on
the socket
so that pins
are aligned
correctly.
2
™
v7 for Stellaris
®
board MCU socket.
Check again if everything is placed correctly and
press the MCU card until it is completely plugged
into the socket as shown in Figure 4-5. If done
correctly all pins should be fully inserted. Only now
you can turn on the power supply.
Figure 4-5 Properly
placed MCU card.
3
EasyMx PRO
v7