27114-RT Parallax, 27114-RT Datasheet - Page 3

• Manufacturer Part Number: 27114-RT
• Description: Daughter Cards & OEM Boards Dual Relay Control Board Kit Retail Pkg
• Manufacturer: Parallax

Step 2
Install the connectors next (J1-J3, J4 and J5).
When installing J1-J3 (green terminal blocks), be
sure to connect these three together by sliding
them into each other using the tab/groove before
installing onto the PCB. Wire holes should be facing
the outside of the PCB.
J5 (remaining green terminal block) is by itself at
the opposite end of the board. Wire holes should
be facing the outside of the PCB.
J4 should be installed with the shorter end of the
pins being inserted into the PCB.
See the photo at right for details.
Step 3
Install the relays last (K1-K2).
Be sure the relays are fully seated into the holes
before you begin soldering.
See the photo at right for details.
Copyright © Parallax Inc.
Dual Relay Board Kit (#27114)
v1.0 5/9/2012 Page 3 of 7