USB-SER-NANO-5 Gravitech, USB-SER-NANO-5 Datasheet - Page 3

• Manufacturer Part Number: USB-SER-NANO-5
• Description: Interface Development Tools NANO SMALL +5V USB-RS-232 CONVERTER
• Manufacturer: Gravitech
• Type: USB to RS-232r

Specifications of USB-SER-NANO-5

• Rohs: yes
• Product: Development Modules
• Tool Is For Evaluation Of: FT230X
• Interface Type: RS-232, USB
• Operating Supply Voltage: 5 V
• Description/function: USB-SER-NANO-5 is a nano small USB to Serial UART (5V logic level) converter module

All serial interface pins are 5V logic level for
USB-SER-NANO-5 and 3.3V logic level for USB-
SER-NANO-3.3
The USB-SER-NANO use power from
the USB port via mini B USB connector.
There is no external power supply
require.
RS-232:
Power:
• TX Transmit from the USB-SER-
• RX
• GND: is a common ground for
• RES: is connected to DTR# with
NANO board. It is a Serial Output
and normally connected to the RX
pin on any microcontroller or
equivalent RS-232.
NANO board. It is a Serial Input
and normally connected to the TX
pin on any microcontroller or
equivalent RS-232.
every pin. This pin must be
connected to ground of your
target board/application.
a 10K Ohm pulled-up resistor. For
some application, it can be use to
reset the microcontroller or target
board.
USB-SER-NANO-5 and USB-SER-NANO-3.3
Receive into the USB-SER-
Interfaces
Copyright © 2008 MicroResearch
USB to RS-232 Converter User Manual
GRAVITECH GROUP
WWW.GRAVITECH.US
Go
www.ftdichip.com
“Drivers” tab. Choose VCP (Virtual COM
Port) drivers.
Save the appropriate .exe or .zip file for
your
Remember the directory (path and
folder).
downloads, double click on the .exe file
and
automatically. Once the installation is
completed, you are ready to plug USB-
SER-NANO to your computer.
For the .zip file, upzip the files to a
suitable directory then plug the USB-
SER-NANO to your computer. Continue
the driver installation process with the
driver files from the zip file.
Download:
USB Driver Installation
the
operating
to
After
installation
the
the
and
system
FTDI
file
process
click
has
to
on
website
been
disk.
start
the