WIZ105SR-EVB WIZnet, WIZ105SR-EVB Datasheet - Page 33

• Manufacturer Part Number: WIZ105SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ105SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ105SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ105SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 3.3 V
• Dimensions: 40 mm x 62 mm x 17 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 250 mA

5.2. Hardware Configuration Examples
5.2.1.
5.2.2.
When changing the parameter value, the MAC address is not changed. As MAC address is the
unique value for the module, user can’t change it. When changing the IP address, input the
new value after first 6bytes.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
STEP 3.
STEP 4.
STEP 1.
STEP 2.
STEP 1.
STEP 2.
STEP 3.
STEP 4.
Read Parameter
Changing IP Address
Check HEX value of new IP address. In here, the new IP address is assumed as
‘192.168.11.10’. Therefore, the hex value ‘C0A80B0A’ is input.
LF(0x0A) are displayed together.
using READ command.
Input ‘>W01C0A80B0AFFFFFF00 … 00FF’.
After completing the change, check if changed value is appropriated saved by
Check ‘<S’ message is displayed. After displaying this message, CR(0x0D) &
WIZ105SR Ver. 03.06
;<S0008DC135E2401C0A80B03FFFFFF00C0A80B011388C0A80B011388FE080001
000000000000000000030100000000000000000020202020202020202020202020
202020202020202020202020202020202020012B2B2B0020202020202020202020
202020202020202020202020202020202020202020002020202020202020202020
2020202020202020202020202020202020202020000000000000000000FF
WIZ105SR Ver. 03.06
;
Supply the power into the module by asserting low 8
Check if the message (‘:’) is displayed to notify the entering of Hardware
Input ‘>R’ and Carriage Return(0x0D).
Check response message.
‘ON’ of SW5 in Test Board).
Configuration. If module is set as ‘Debug mode’, the message is displayed
after showing model name and version.
th
pin of J1(or setting
33