RN174P-I/RM Roving Networks, RN174P-I/RM Datasheet - Page 8

• Manufacturer Part Number: RN174P-I/RM
• Description: WiFi / 802.11 Development Tools SuRFboard PCB for RN-171 w/ PCB trace
• Manufacturer: Roving Networks

Specifications of RN174P-I/RM

• Product Category: WiFi / 802.11 Development Tools
• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: RN-174
• Protocol Supported: 802.11 b/g
• Frequency: 2.4 GHz
• Interface Type: RS-232, UART
• Operating Supply Voltage: 3.3 V
• Antenna Connector Type: PCB
• Description/function: RN-174 board with PCB trace antenna, standard firmware
• Dimensions: 2 in x 1.1 in x 0.45 in
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Modulation Technique: DSSS, OFDM

ORDERING INFORMATION
Table 7 provides ordering information for the RN-174 evaluation board.
Table 7. Ordering Information
Notes:
1.
Visit http://www.rovingnetworks.com for current pricing and a list of distributors carrying our products.
www.rovingnetworks.com
RN-174-P
RN-174-W
RN-174-U
RN-174-C
RN-174-K
RN-UFL-SMA6
RN-SMA4-RP
For other configurations, contact Roving Networks directly.
Roving Networks, Inc.
102 Cooper Court
Los Gatos, CA 95032
[phone]
www.rovingnetworks.com
For these non-standard configurations, please contact Roving Networks directly at [e-mail].
Part Number
RN-174 board with PCB trace antenna, standard firmware
RN-174 board with wire antenna, standard firmware, Note (1)
RN-174 board with U.FL. connector, standard firmware, Note (1)
RN-174 board with chip antenna, standard firmware, Note (1)
Development Kit (Includes the RN-174 board and accessory cables)
6 inch cable with U.FL connector on one end and SMA on the other
4” external antenna with reverse polarity SMA connector. Used with RN-UFL-SMA6
Copyright © 2012 Roving Networks. All rights reserved. Roving Networks is a
registered trademark of Roving Networks. Apple Inc., iPhone, iPad, iTunes, Made
for iPhone are registered trademarks of Apple Computer.
Roving Networks reserves the right to make corrections, modifications, and other
changes to its products, documentation and services at any time. Customers
should obtain the latest relevant information before placing orders and should verify
that such information is current and complete.
Roving Networks assumes no liability for applications assistance or customer’s
product design. Customers are responsible for their products and applications
which use Roving Networks components. To minimize customer product risks,
customers should provide adequate design and operating safeguards.
Roving Networks products are not authorized for use in safety-critical applications
(such as life support) where a failure of the Roving Networks product would
reasonably be expected to cause severe personal injury or death, unless officers of
the parties have executed an agreement specifically governing such use.
Version 1.3r 4/9/2012
Description
RN -17 4-DS
8