SCA3100-D04 DEMO Murata Electronics, SCA3100-D04 DEMO Datasheet - Page 8

• Manufacturer Part Number: SCA3100-D04 DEMO
• Description: Acceleration Sensor Development Tools SCA3100 Demo Board
• Manufacturer: Murata Electronics

Specifications of SCA3100-D04 DEMO

• Rohs: yes
• Tool Is For Evaluation Of: SCA3100-D04
• Acceleration: 2 g
• Sensing Axis: Triple Axis
• Interface Type: SPI
• Operating Voltage: 3.3 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Sensitivity: 900 count/g

VTI Technologies Oy
www.vti.fi
The resultant (acceleration [g], speed [m/s] and distance [m]) is calculated from the respective 3-axis
results as follows:
Please notice that inertial navigation contains six degrees of freedom and 3-axis accelerometer can
handle only three degrees of freedom (rotations and tilting can not be detected when inertial navigation
is performed only by 3-axis accelerometer).
Figure 9. PWM display.
Figure 10. Self test display with SCA8x0 product.
Res
=
x
2
+
y
2
+
z
2
Doc.Nr. 8269300C
PWM (pulse width modulation) view shows
the SCA8x0 output in PWM and simulated
analog format. PWM(%) display shows the
PWM output as 0/1 ratio in % and calculated
analog output level.
The view is available for SCA8x0 product
versions that have the PWM output.
SELFTEST view shows the SCA8x0 output
and GFC bit status over time during the self
test. In the display the user can:
-
-
To start the self test press the "START
SELFTEST" -button. After the self test the
actual output waveform is displayed on the
screen.
start the self test (single cycle)
vary the direction to which the sensing
element is deflected during the self test
SCA8X0-21X0-31X0 DEMO KIT
User Manual
8/18