MOD-ZIGBEE-PIR Olimex Ltd., MOD-ZIGBEE-PIR Datasheet - Page 6

• Manufacturer Part Number: MOD-ZIGBEE-PIR
• Description: Zigbee / 802.15.4 Development Tools ZIGBEE PIR MODULE
• Manufacturer: Olimex Ltd.

Specifications of MOD-ZIGBEE-PIR

• Rohs: yes
• Product: Development Boards
• Tool Is For Evaluation Of: MRF24J40, PIC18F26K20
• Frequency: 2.4 GHz
• Interface Type: UEXT
• Operating Supply Voltage: 3.3 V
• Antenna Connector Type: On-board
• Description/function: MOD-ZIGBEE-PIR is a motion detector unit equipped with passive infrared (PIR) sensor
• Dimensions: 93 mm x 32 mm

This section helps you set up the MOD-ZIG-BEE-PIR development board for the first time.
Please consider first the electrostatic warning to avoid damaging the board, then discover
the hardware and software required to operate the board.
The procedure to power up the board is given, and a description of the default board
behavior is detailed.
2.1 Electrostatic Warning
The MOD-ZIG-BEE development board is shipped in a protective anti-static package. The
board must not be exposed to high electrostatic potentials. A grounding strap or similar
protective device should be worn when handling the board. Avoid touching the component
pins or any other metallic element.
2.2 Requirements
In order to set up the MOD-ZIGBEE-PIR evaluation board, the following items are required:
-
-
Note: The board is not delivered with an ICSP debugger/programmer, which is needed if you
want to use software different than the one the board is preprogrammed with. The board
comes preprogrammed as a RFD end device (you will need a coordinator device to
accomplish communication). Remember that the connector on the board is mini ICSP (6 pin,
step 0.5’’). You may use one of the following device combinations for this purpose:
-
-
Or any compatible device you already have.
For the wireless communication you can download the stack software for free from the
MiWi web page or ZigBee’s web page. Also, a host-based software toolchain might be
required in order to program/debug the MOD-ZIGBEE-PIR board.
The MOD-ZIG-BEE development board itself
2 x 1,5V batteries AA type OR 3,3 V external supply OR ICSP programmer
Olimex’s PIC-ICD2-POCKET + Olimex’s PIC-ICSP
Olimex’s PIC-KIT3 + Olimex’s PIC-ICSP
SETTING UP THE MOD-ZIGBEE-PIR
Olimex 2012 ©
DEVELOPMENT BOARD
SECTION 2
Page 6 of 20
MOD-ZIGBEE-PIR