EVAL_PAN1720-BR Panasonic Electronic Components, EVAL_PAN1720-BR Datasheet - Page 34

• Manufacturer Part Number: EVAL_PAN1720-BR
• Description: Bluetooth / 802.15.1 Development Tools BT PAN1720 Eval Kit BlueRadios FW
• Manufacturer: Panasonic Electronic Components

Specifications of EVAL_PAN1720-BR

• Rohs: yes
• Product: Evaluation Kit
• Tool Is For Evaluation Of: PAN1720
• Frequency: 2.4 GHz
• Interface Type: SPI, UART, USB
• Operating Supply Voltage: 2 to 3.6 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C

CLASSIFICATION
SUBJECT
CUSTOMER’S CODE
PAN172x / PAN171x
33.
34.
33.1.
33.2.
INDUSTRY CANADA CERTIFICATION
BLUETOOTH CERTIFICATION
PANASONIC INDUSTRIAL DEVICES EUROPE GMBH
PAN17xx is licensed to meet the regulatory requirements of Industry Canada (IC),
license: IC: 216Q-PAN17
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to
clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Users can obtain Canadian information on RF exposure and compliance from www.ic.gc.ca.
This device has been designed to operate with the antennas listed in Table 20 above, having
a maximum gain of 0.9 dBi. Antennas not included in this list or having a gain greater than 0.9
dBi are strictly prohibited for use with this device. The required antenna impedance is 50
ohms. The antenna used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Due to the model size the IC identifier is displayed in the installation instruction only and can
not be displayed on the modules label due to the limited size (8.7x15.6mm).
IC NOTICE
The devices PAN17xx, for details refer to Chapter 26, including the antennas, which are listed
in 32.5, complies with Canada RSS-GEN Rules. The device meets the requirements for
modular
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference
LABELING REQUIREMENTS
The Original Equipment Manufacturer (OEM) must ensure that IC labeling requirements are
met. This includes a clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC
identifier is 216Q-PAN17. This IC identifier is valid for all PAN17xx modules, for details, see
the Chapter 26. Ordering Information.
In
"Contains IC: 216Q-PAN17"
The Design is listed as Controller Subsystem with QDID: B016552
https://www.bluetooth.org/tpg/EPL_Detail.cfm?ProductID=22941
The module is listed as EPL based on Texas Instruments QDID B016552.
To create an EPL, two Subsystems e.g. QDID: B016552 and QDID: B017183 (software stack)
need to be combined.
any
CLASS 2 BLUETOOTH LOW ENERGY
case
transmitter
SINGLE MODE MODULE
that
PRODUCT SPECIFICATION
the
PANASONIC’S CODE
ENW89820AxKF / ENW89835AxKF
end
approval
may
product
cause
as
must
detailed
be
No.
DS-17xx-2400-102
PAGE
DATE
www.pideu.panasonic.de
undesired
labelled
in
exterior
28.01.2013
34 of 35
RSS-GEN.
operation.
REV.
1.7
with