IQS213EV03S Azoteq, IQS213EV03S Datasheet - Page 3

• Manufacturer Part Number: IQS213EV03S
• Description: Touch Sensor Development Tools IQS213 Eval Kit
• Manufacturer: Azoteq

Specifications of IQS213EV03S

• Tool Is For Evaluation Of: IQS213
• Interface Type: I2C, Mini-USB
• Operating Voltage: 1.8 V to 3.6 V

4 Datastreaming Operation
For operation in data streaming mode, it is
necessary to interface the IQS213EV03 EV-Kit
to a personal computer by means of a Mini-
The IQS213 Software GUI is available from the Azoteq website at www.azoteq.com.
Important Note:
instructions and is available for download at www.azoteq.com.
Copyright © Azoteq (Pty) Ltd 2012.
All Rights Reserved.
The GUI display is illustrated in Figure 3.3 where channel 3 shows a valid touch, and proximity is
detected on all other channels.
Install the IQS213 GUI software
Plug in the desired module into the Mainboard
Connect the Mainboard to a personal computer with Mini-USB cable
Run the IQS213 Software GUI and Click on “Start”
The IQS213 GUI User Guide contains additional information and operating
Figure 4.1
ProxSense
IQS213 Graphical User Interface
IQ Switch
IQS213EV03 Evaluation Kit User Manual
®
Series
Revision 1.0
USB cable. The IQS213 GUI software is used
to stream and visualize data from the
IQS213EV03
®
EV-Kit
in
September 2012
real-time.
Page 3 of 5